DEZOD MOTORSPORTS: ALPHA SERIES V-band Manifold Installed (Page 21)
#442
I might be able to. The problem is that I can't do too much yet with it because I need to start tuning it and I am in the process of getting the rad fluid to flush and fill her up.
#447
The customer wants a muffler added to the system because he said it was too loud.
He also needs a new clutch as this Comp Clutch Stage 4 Sprung that has 40K miles on it will not disengage. The customer elected to have an ACT put in. Clutch is here and over the next few days hopefully we can have this car buttoned up and ready for tuning.
He also needs a new clutch as this Comp Clutch Stage 4 Sprung that has 40K miles on it will not disengage. The customer elected to have an ACT put in. Clutch is here and over the next few days hopefully we can have this car buttoned up and ready for tuning.
#450
PM sent
#451
4" intake is on the car now feeding the GT3076R cold air.
ACT clutch is going in tomorrow, muffler after that then off to tune the car.
ACT clutch is going in tomorrow, muffler after that then off to tune the car.
Last edited by paul_dezod; 02-08-2011 at 01:58 PM.
#453
Update on her build.
Go Faster Parts:
Stock block
Dezod custom blow-through MAF
Dezod custom S1 adapted IC pipes
Griffin custom extruded tube & fin intercooler core
Dezod Alpha Manifold
Dezod Alpha Screamer Divorced Dump Tube
Dezod Alpha 3" Downpipe & S-pipe
Dezod custom 3" V-band Exhaust
TiAL MV-R 44mm Wastegate (10 PSI Spring)
Garrett GT3076R w/ 1.06 A/R (V-band inlet/outlet TiAL SS turbine) turbocharger
Dezod custom "Big Dog" 4" Intake
GReddy Catch Can
Walbro 255
HKS SSQV BOV
Dezod 850cc injectors
ACT Street Clutch
Interior & Electronics
Dezod/APR X1
AEM UEGO
AEM EGT
A'PEXi Boost Gauge
Blitz Spec S Boost Controller
ATI Center Pod
Sparco Milano Seats
Suspension & Wheels
OS Giken LSD
KW V2 Coilovers
StopTech Stage 2 Brake Kit
Dan Gardner 17x8.5 +40 Enkei RPF1s
245/45/17 Dunlop Direzza Star Specs
Bling
Kami Reverse CF Hood
GReddy CF Air Diversion Panel
Go Faster Parts:
Stock block
Dezod custom blow-through MAF
Dezod custom S1 adapted IC pipes
Griffin custom extruded tube & fin intercooler core
Dezod Alpha Manifold
Dezod Alpha Screamer Divorced Dump Tube
Dezod Alpha 3" Downpipe & S-pipe
Dezod custom 3" V-band Exhaust
TiAL MV-R 44mm Wastegate (10 PSI Spring)
Garrett GT3076R w/ 1.06 A/R (V-band inlet/outlet TiAL SS turbine) turbocharger
Dezod custom "Big Dog" 4" Intake
GReddy Catch Can
Walbro 255
HKS SSQV BOV
Dezod 850cc injectors
ACT Street Clutch
Interior & Electronics
Dezod/APR X1
AEM UEGO
AEM EGT
A'PEXi Boost Gauge
Blitz Spec S Boost Controller
ATI Center Pod
Sparco Milano Seats
Suspension & Wheels
OS Giken LSD
KW V2 Coilovers
StopTech Stage 2 Brake Kit
Dan Gardner 17x8.5 +40 Enkei RPF1s
245/45/17 Dunlop Direzza Star Specs
Bling
Kami Reverse CF Hood
GReddy CF Air Diversion Panel
#454
With a built block that thing would be quite nasty. Talk them into it. Any track time goals or horsepower goals the customer has?
And Paul, once your done tuning can you tell me at what RPM the car hits full boost? Thanks.
And Paul, once your done tuning can you tell me at what RPM the car hits full boost? Thanks.
#455
He wants to hit 300-350whp, which should be a breeze on this setup.
I will post up mounds of data once she is tuned and ready.