paul_dezod

These injectors are truly heaven sent! No more cutting, splicing, pig tails or anything!!! Drop in 100% with no modification necessary. This is the one true and only way to get the OEM fit and feel with all of the Dezod performance. All sets of injectors are flow matched as well to ensure top quality and performance.

Flow Rate: 850cc/min, 83LBS/HR at 3 bar (43.5 PSI)
Pressure: Min. 40 PSI (2.7 bar), Max. 107 PSI (7.5 bar)
All O-rings are included for easier installation.

Pictures coming soon!

Your price, $399.00

trd07tc

iTrader: (-1)

who makes em?

RusWolf

iTrader: (3)

i think they are deutsch or however its spelled.

i say that judging by the description.

On a side note, i might get these actually over my 700cc which probably max out before 400 whp.

Paul how much these would hold or at what whp will these die ?

paul_dezod

These are done "private label" for us much like other companies do.

paul_dezod

Depends on fuel pressure run through them. If it's stock, don't see why not 450whp.

SoFloTC

iTrader: (3)

ruswolf im on 700's and have a walbro fuel pump.. 700's will start maxing out at like 400+

RusWolf

iTrader: (3)

^^ thanks SoFlow. I've been thinking of getting the fuel return set up done as well. probably the one that p-tuning releases ( or copying it for cheaper price, lol )

paul_dezod

Yev for the growth you're looking into, these would be better suited.

trd07tc

iTrader: (-1)

700s on stock pressure will go to about 365 safetly 700s on +20psi will go to 440 safetly

paul_dezod

All depending on the tune and the fuel pressure.

SoFloTC

iTrader: (3)

I just ordered these Paul, Ill take some snapshots of them on the rail for ya and let u know how they hold up!

paul_dezod

Check your email Chad.

I will do you one better. I will snap pics on our prototype fuel rail and a stocker if need be.

ElevationTC

waiting for pics

paul_dezod

Thanks for all of the recent orders! We are sold out of the current first production run and will have more in the next week or so.

garabaldy

I just recieved mine and going to install tonight, I'll let you all know how it goes.

paul_dezod

These should work MUCH better than your 630s at the that boost level and altitude garabaldy

SoFloTC

iTrader: (3)

had to cancel my order for these, paul sold em to fast for me lmao...

B_Real45

Gary where ya been?! I sent you an email a week ago.

Rob_DESCENDANT

"private label" smells like china.

IMO, www.rceng.com ONLY WAY TO GO. There customer list speaks for itself.

paul_dezod

Thanks for the bump Rob!

Sorry, no China here. No dice, next roller at the line please.

These are no different than any RC injector for that matter. A "re-worked" Bosch or Denso.....