Dezod Stage I Dyno + Tune
#1
Senior Member
SL Member
Team ScioNRG
Thread Starter
Dezod Stage I Dyno + Tune
Headed out yesterday with a buddy to drive 1hr 1/2 to the nearest dyno facility to get tuned. Alot of fun putt putting down I-95 trying to avoid boost
GodSpeed Auto Salon in Fayetteville, NC.
Ang tuned the car and did a wonderful job! Did about 15-20 pulls!!! After about the 10th one my exhaust was a literal flamethrower! After about an hour on the dyno we did some street tuning for about another hour. Ang tuned the car very consistantly at a very conservative 11:1 (11.0 AFR). From 5500rpms to 6200 AFR drops to 10.5 just for added security. When i left, ang didn't give me all of the dyno run print outs and i didn't realize til i got home . I do have one however that was about somewhere in the middle of tuning:
4th Gear pull
250whp/248wtq
AFR's were somewhere around the low 10's here. The final pull on the final tune was around 254whp/251wtq. Not much gain over this graph but the plots were much smoother. Everything was tuned to be conservative and reliable.
-Dezod Stage I
-8lbs of boost
-Megan racing 2.25" mid-pipe
-HKS axle
I tripped out when everyone at the shop told me i was the 4th Dezod tC that they've seen this month! Plus for added fun, there was a BSP tC in their shop with a blown motor with a Dezod Stage I kit on it too!!! Guy blew his motor because he forgot to plug up his wastegate
Major booboo. 390whp @ 23lbs = *POP*
GodSpeed Auto Salon in Fayetteville, NC.
Ang tuned the car and did a wonderful job! Did about 15-20 pulls!!! After about the 10th one my exhaust was a literal flamethrower! After about an hour on the dyno we did some street tuning for about another hour. Ang tuned the car very consistantly at a very conservative 11:1 (11.0 AFR). From 5500rpms to 6200 AFR drops to 10.5 just for added security. When i left, ang didn't give me all of the dyno run print outs and i didn't realize til i got home . I do have one however that was about somewhere in the middle of tuning:
4th Gear pull
250whp/248wtq
AFR's were somewhere around the low 10's here. The final pull on the final tune was around 254whp/251wtq. Not much gain over this graph but the plots were much smoother. Everything was tuned to be conservative and reliable.
-Dezod Stage I
-8lbs of boost
-Megan racing 2.25" mid-pipe
-HKS axle
I tripped out when everyone at the shop told me i was the 4th Dezod tC that they've seen this month! Plus for added fun, there was a BSP tC in their shop with a blown motor with a Dezod Stage I kit on it too!!! Guy blew his motor because he forgot to plug up his wastegate
Major booboo. 390whp @ 23lbs = *POP*
#2
Sweet
call the shop and have them email you the run files...
then download the software http://www.dynojet.com/downloads/software.aspx
call the shop and have them email you the run files...
then download the software http://www.dynojet.com/downloads/software.aspx
#8
Senior Member
SL Member
Team ScioNRG
Thread Starter
Originally Posted by rhythmnsmoke
Good #'s. I was pushing the same on about 7lbs of boost. So, when are you going to get some vids of her?
#9
Originally Posted by Prototype_xB
Originally Posted by rhythmnsmoke
Good #'s. I was pushing the same on about 7lbs of boost. So, when are you going to get some vids of her?
you using USB to transfer the vid.
#16
Senior Member
SL Member
Team ScioNRG
Thread Starter
Originally Posted by toyotaracer9
was this the best dyno sheet ? looks prettyu good , 1/4 times any time soon ?
#17
Senior Member
SL Member
Team ScioNRG
Thread Starter
Originally Posted by rrimportracer
wow that dyno has nasty holes in it, hopefully its all better now
#19
Senior Member
SL Member
Scion Evolution
Originally Posted by Prototype_xB
Destoryed a mildly modded 06 GTi tonight. (bov, exhaust from all i could tell). I mean destoryed