thendawg

iTrader: (2)

On another note... I just got home and found out I got my Emanage Ultimate, Universal Harness, and Pressure sensor in Dunno where the wideband harness is, however i did order it from somewhere else Sooo to those using the ultimate, if I set my maps to use relative pressure for the y axis, it will read that from the pressure sensor, correct? I also noticed it had an option for pressure sensor (v) for the y axis, thats why i wanted to make sure. Id rather not have to set it to the pressure sensor in voltage and have to convert it to psi in my head lol

m6ar2cel6oTC

You can set it to psi. And having that wideband sensor makes it easier to datalog with the ultimate.

bdis3

iTrader: (3)

Ive done it like 4 times now. Instead of spinning 3rd and 4th, you just spin 3/4 way through 3rd. I'd take a LSD over slicks from my experience.

m6ar2cel6oTC

^^ that's a big help considering spinning 1-4 to 1-3 3/4. Compared to getting drag radial and LSD. That's if you don't have the money.

thendawg

iTrader: (2)

Any of you guys run the Nitto 555r's? Are they decent? complete junk?

thendawg

iTrader: (2)

Oh and another question lol, has anyone ever tried running a 275/40/17 on the tc, on say a 17x9 wheel? IM just curious if this would even be possible

speedintc

iTrader: (1)

im sure it would be possible depending on offset. would you only run that on the front? ____ would probably stick out like a ****. you see all them damn stretched tire gurus runnin 18x10.5 with a 225 width tire. i think you could make it work specially since your not tucking tire or anything.

thendawg

iTrader: (2)

I was planning on running 17x9's with a +42 offset... This would just be a reallllly expensive gamble if it didnt work lol

thendawg

iTrader: (2)

Blah im thinkin about just going with what I know will work - 17x8 +48 offset, with Nitto 555r's in 245/45/17

speedintc

iTrader: (1)

or you could find some 8.5s and run 255s like myself.

s_rhabb

I run 225s on stock size wheels.

m6ar2cel6oTC

^^^^^^225 wont do anything with the power hes making regardless if he gets drag radials.

thendawg

iTrader: (2)

Unfortunately, no DR's in 255's - Its either 245 or 275 lol

bdis3

iTrader: (3)

I spun up to 60mph on 245 radials and I wasnt making 3/4 the power you are. If your heatr is set on radials, 275 is the way to go.

thendawg

iTrader: (2)

Will 275/40/17 fit?

bdis3

iTrader: (3)

anything fits. If your on coilovers just raise the car up. I fit 245/45 radials on an 8.5 rim 30 offset. Just raised the coils a little and rolled my fenders. And Dont even think about still having your plastic liners.

One guy here on the forums runs a nasty 275 tire for road racing or auto-x. If i get a chance I'll look it up for you.

thendawg

iTrader: (2)

Yea Id really like to see someone whos actually ran 275/40/17's I wanna do it, but im scared of wasting the money on buying everything, than having them not fit

bdis3

iTrader: (3)

There. It's possible. And its been done. Do it.

https://www.scionlife.com/forums/sho...d.php?t=195385