im lookin into possibly using an e351 trans in my build. anyone have any issues with fabbing this up? my main concern is if id have to get different axles or hubs or anything of that nature. any input from the guys that have done this swap would be greatly appreciated.

 

No fabbing! needed it bolts right up same axles and all

 

Yep bolts right up. Trust me Ive put like 3 of them in lol - just make sure you get the right thing. Supposedly the xb2 and a couple other cars had an E351 case, but still had the higher 4.xx diff the tc has. The only car I know for sure that has the 3.9x diff and E351 case is the 02-04 Camry 5 speed.

 

awesome!!! now to see if i can find one at a reasonable price.

 

Theres alot for around $300+shipping

 

ill prolly get it from one of my local bone yards this way if theres nething wrong with it i can call em up and holler at em. lol

 

yea local junkyards you can get one for like 350 with cash in hand.

 

yup great transmission works good for turbo setup love the long gears i can do about 110 in third 140 in 4th and 170+ in 5th my rev limiter is set at 7400 tho

only thing that sucks is the speedo stops reading affter about 145 lol

 

i would like to see a video of a gps or something to prove that 170 lol

 

I got videos of my car doing the 140 in 4th in my YouTube I have only hit it in 5th one time an that was racing some cls550 I was in 5th gear at a Litle over 7k so I estimate 170+ from what I have seen ever 1000 rpm in 5th gear is about 25 mph so 7x25=175 idk if that is 100% but that's what I have figured But in the end I'm sure I hit 160+ no prob

 

wouldnt be suprised ive been 160 in thendawgs car a couple times and its pretty scary lol. his radar detector reads how fast your goin.

 

yes the dawg cars very fast seen it in action on a video and he did my tune but last time i went his car was down

 

lol well his car is back up and running strong again. him and i are making a trip down to houston for tx2k12 if you wanna meet up with us. unfortunately i wont have my 351 installed yet but still gonna be fun

 

are these speeds with built e351 tranny or just stock with raised rev limiters??

 

Stock e351 rev inter set at 7400 rpm

 

hmm january when drop new clutch and lsd in may want to do this too

 

WOAH!!!!! WAIT A MINUTE.....can u guys please explain this e351 tranny thing???....I just bought a stock 05 tC tranny with only 18,000 miles on it for $425. My third gear is fukd up. So I'm going to swap out my trd LSD in the new tranny....but I just bumped into this. And how is 7400 rpm available with stock ecu??

 

well im on a built motor and semi built head i got brian crower springs and retainers port and polish and 3 angle vavle job so i can safely rev that high. but to answer your question i am using a greddy emanage ultimate to go past the stock revlimter its a piggy back for the stock ecu.

 

So does having this tranny help on the track(1/4 mile) for better times? Does my trd LSD fit? I'm might have to return my tranny for a e351

 

Yes it definately helps for better times.