EBC install, couple questions
02-24-2009, 06:41 PM
#1
Senior Member
SL Member
Thread Starter
Join Date: Jun 2006
Location: St. Louis, MO
Posts: 423
EBC install, couple questions
Just got my Gizzmo IBC
on the solenoid side of the install, Currently My wastegate has one vac line coming from the intake manifold to the wastegate(Tee'd in). The diagram shown in the instructions shows it using both nipples on the wastegate. Can anyone clear this up for me? When my tuner installed a MBC he just cut the existing line, and installed it inline. Thats how I thought this would be installed.
Also here is the instructions for the install, I have an external WG as they show 2 different ways of installing it.
http://www.gizzmoelectronics.com/pdf...%20Ver1.06.pdf
on the solenoid side of the install, Currently My wastegate has one vac line coming from the intake manifold to the wastegate(Tee'd in). The diagram shown in the instructions shows it using both nipples on the wastegate. Can anyone clear this up for me? When my tuner installed a MBC he just cut the existing line, and installed it inline. Thats how I thought this would be installed.
Also here is the instructions for the install, I have an external WG as they show 2 different ways of installing it.
http://www.gizzmoelectronics.com/pdf...%20Ver1.06.pdf
Thread
Thread Starter
Forum
Replies
Last Post
Beesh
Scion xA/xB 1st-Gen ICE & Interior
3
01-09-2015 06:30 PM
TheRedBox
Scion xA/xB 1st-Gen Drivetrain & Power
31
12-02-2003 04:53 PM
