trdtopcat01

I just need to know if it is possible to run a turbo kit on the stock engine, stock injectors/ computer, on 5-6 lbs of boost? also is there anyone in alabama willing to help with the install?

m6ar2cel6oTC

search! there i helped with your install!!!!

trdtopcat01

been searchin while i've been in the boring music appreciation class....still couldn't quite find the answers i was looking for. so i decided to make my own thread

m6ar2cel6oTC

search for stage 0 turbo kit like zpi racing one. that i think uses stock injectors. all i have to say is dont take no cheap route!

crush02342002

iTrader: (2)

stock injectors, stock computer, no managment, on boost=fail....atleast get some sort of managment then maybe

rhythmnsmoke

By fail you mean doesn't make a whole lot of power then yes. But fail in that it will blow up your engine...no.

crush02342002

iTrader: (2)

your saying stock injectors, no engine managment, on 5-6psi posses no threat to the engine?

m6ar2cel6oTC

thats how zpi stage 0 was and no one had a problem with. either way crush i see what your saying and its like i was saying not to go cheap. if you just want a couple of whp then go with s/c but if you go turbo make sure you go the right way! not the cheap way! point blank!

draxcaliber

it depends on what size turbo you use to make that boost. small turbos like the ones with the zpi kit, yes, but bigger ones are going to be trouble.

trdtopcat01

ok i understand...the only reason i posed this question is because i just bought a used turbo toyotas kit from cessblood on here and i wanted to know would it be a major issue before i did an install...thanks guys

jsg93085

what size turbo is it? if it's a t3/t4, then get engine management because it has a higher cfm than the zpi stage 0 kit

trdtopcat01

yes it's a t3/t4...so i could do a partial throttle? manufacturer?

rhythmnsmoke

That's what a ZPI stage 0 is. Stock injectors, no management, no intercooler, and 6psi of boost.

But as mentioned above...Stage 0's used a smaller turbine. The larger turbo's I would not recommend this type of setup. t3/t4 turbo = No.

crush02342002

iTrader: (2)

oh so your the one....lol
i was just talking to cess the other day, he misses his kit bad....lol
i kinda know how he feels....lol
then that means youv got the custom dumptube i made for him....it prolly looks like booty by now though.

but yeah with that turbo i strongly suggest engine managment (aem fic, greddy ultimate, ect) and 550cc injectors. if im not mistaken the wastgate spring is a 8.7psi spring....i could be wrong but i thought cess was running 8psi or more. if not im pretty sure you can run with stock injectors and the fic @ 5-6psi...i have done it on the same kit but not the exact same turbo i dont think.

crush02342002

iTrader: (2)

i thought they used slightly larger injectors...i guess not...lol

Syldrin

iTrader: (1)

no No NO! you need injectors and tuning on that size turbo. no joke here. i'm serious business. get a AEM FiC and some injectors you will be much happier.

trdtopcat01

i'm the one, hmm...something i need to know about? at any rate, still helpful advice...

crush02342002

iTrader: (2)

lol...nahh...i was just talking to him the other day and he mentioned he had sold his turbo kit. He's lost without it and going through boost withdraws like a crack head.

trdtopcat01

lol...well i guess it's worth the wait...get it done right, right? so with a couple of lucky bargains...maybe $700 left to save...and the saga continues

Keeshwah

I had my kit installed w/o management but I have larger injectors. Link