RusWolf

iTrader: (3)

congrats on the tune and be safe now !

ecko04

Nice job, now throw boosted brothas in the sig!

Cwatz5219

Thanks man. Its been long overdue.

Cwatz5219

Thanks man and i most definitely will
LOL forgot about that.

Cwatz5219

Ok guys here's the dyno sheet. Sorry for the quality. I forgot to scan it when i got home so i just took a pic of it with my iphone. Vids will be posted oncei locate where i put my camera lol

Cwatz5219

Hey guys i think i may have asked this before but i don't remember on what page but for 1 step colder plugs what should the gap be at? I think i may be experiencing spark plug blow out at the top of 5th. For some reason it only happens at the very top of 5th. I can take 1st-4th all the way to redline fine but when i get close to redline in 5th i get a sound like a vacuum line blew off and my CEL light starts to flash and after about 30 secs it goes away and everything's fine. What do you think it could be?

crush02342002

iTrader: (2)

maybe blowout, too agressive of timing, fouled plugs, or too much heatsoak.

Cwatz5219

Damn that many possibilities?? Well the plugs are brand new. Not sure about timing. Not sure what you mean by heat soak. But as for the plugs what should they be gaped at. I took them out the box and just installed them. I think they may have been at .38 but i don't remember.

crush02342002

iTrader: (2)

need a part number and i could maybe tell ya.

crush02342002

iTrader: (2)

heat soak= pipes, ic, very hot. hotter it gets the hotter your charge air gets, hotter the charge air the more prone to det. and power suffers.

crush02342002

iTrader: (2)

bkr9eix (3step ngk plugs)=.032
bkr8eix (2step ngk plugs)=.032
bkr7eix (1step ngk plugs)=.032
bkr7eix-11 (1step ngk plugs)=.044
bkr6eix (stock ngk plugs)=.032
bkr6eix-11 (stock ngk plugs)=.044

stock=stock heat range
-11=.044 gap

tcturbo07

I have 1step cold ngk plugs gap at .028

Cwatz5219

NGK Iridium BKR7EIX-11 (1 Step Colder; Set of 4)

Cwatz5219

Disregard last post... lol Didn't realize you posted them already

Cwatz5219

Is there anyway to help eliminate heat soak?

Cwatz5219

bkr7eix (1step ngk plugs)=.032
bkr7eix-11 (1step ngk plugs)=.044

Whats the difference between the two. If they're both 1 step why the diff gap?

crush02342002

iTrader: (2)

for different apps...lol but yeah thats the only diff.

crush02342002

iTrader: (2)

prolly want to go to a smaller gap than .044

Cwatz5219

So is .28 ideal?

tcturbo07

I had misfire problems when my gap was .30. Problem went away when I gap them at 0.28. I think your problem has to with your gaps.