Finally Boosted!!!... Big Thanks to SL... Update and Dyno Pg. 117
#1841
Senior Member
Scikotics
SL Member
Thread Starter
Join Date: Aug 2006
Location: Rockland, NY
Posts: 1,616
#1844
You mean the internals right (turbine and compressor wheel)????
Is this what you're referring to???
http://www.atpturbo.com/mm5/merchant...gory_Code=CHRA
Is this what you're referring to???
http://www.atpturbo.com/mm5/merchant...gory_Code=CHRA
If you get a hold of any undivided Full size GT35R or GT30R, you can change the turbine housing. You dont have to just get the CHRA cause I dont have a spare compressor housing. I still will have to check with the shop about the turbine housing.
#1846
Senior Member
Scikotics
SL Member
Thread Starter
Join Date: Aug 2006
Location: Rockland, NY
Posts: 1,616
#1848
Senior Member
Scikotics
SL Member
Thread Starter
Join Date: Aug 2006
Location: Rockland, NY
Posts: 1,616
Wasn't able to get a pic of the clips but i took a look at them and their more round than our setup which is more oval shaped. I hope that makes sense. I'm thinking if i get clips for both vehicles i might me able to make it work by splicing them together. What do you guys think? I'm going to try and take a pic tomorrow.
#1850
Senior Member
Scikotics
SL Member
Thread Starter
Join Date: Aug 2006
Location: Rockland, NY
Posts: 1,616
#1852
just thought about it you would need a clip that would take place of the old injectors...thats something your not going to find in the junkyard im affraid...you could order some pnp injector clips from maybe p-tuning and cut off one side and splice in the ones to fit the new injectors...you get what im saying?
oh and merry christmas brethren, this time next year you should be boosted and working on your second engine...lmao...j/k
oh and merry christmas brethren, this time next year you should be boosted and working on your second engine...lmao...j/k
#1853
hey man i'll be gettin that gauge out to you this week...just been busy with christmas and all haha just dont want you to think i forgot about you..should have it before the new year i'll tell you that much!! hope all is well and happy holidays!....merry x-mas frm me and nichole!
#1857
Senior Member
Scikotics
SL Member
Thread Starter
Join Date: Aug 2006
Location: Rockland, NY
Posts: 1,616
Hey guys long time no hear. Been busy with school and new years BS.
Update!!!!
My boy Pierre/Exodus Decided to give me his simple kit with everything. He felt bad for how i got screwed by TT so he decided to just give it to me. With that said i pretty much have everything i need except for a few misc stuff.
Thank you guys for everything you've contributed to helping me get boosted.
Here's what i currently have:
Divided manifold
Log style manifold
Intercooler pipes x2
Intecooler
Garrett t3/t4b stage 5 wheel, .60a/r compressor housing, .82a/r turbine housing
Oil feed/drain line x2
3" dpipe/spipe
2.5" dpipe
AEM wideband, oil pressure, and boost gauge
Creative Compacts/Concepts 3 gauge a-pillar pod
Boost controller
Slim fans
Apexi replica turbo timer x2
Oil fittings and vacuum lines
HKS SSQ BOV
Greddy BOV
05-06 PnP Harness
07+ Pnp Harness
Pre-tapped oil pan
550cc Denso injectors
AEM F/IC
I think thats it. A lot of this stuff will be for sale seeing as though i won't need any of them. If anyone's interested in any parts please let me know.
What i still need to get:
Harware pack from Dezod
All new gaskets
Loctite
1 Step colder plugs
Tune
Exhaust
Now i have a question, would i be able to use my divided manifold with an undivided turbo while still using 2 wastegates or would that be pointless?
Update!!!!
My boy Pierre/Exodus Decided to give me his simple kit with everything. He felt bad for how i got screwed by TT so he decided to just give it to me. With that said i pretty much have everything i need except for a few misc stuff.
Thank you guys for everything you've contributed to helping me get boosted.
Here's what i currently have:
Divided manifold
Log style manifold
Intercooler pipes x2
Intecooler
Garrett t3/t4b stage 5 wheel, .60a/r compressor housing, .82a/r turbine housing
Oil feed/drain line x2
3" dpipe/spipe
2.5" dpipe
AEM wideband, oil pressure, and boost gauge
Creative Compacts/Concepts 3 gauge a-pillar pod
Boost controller
Slim fans
Apexi replica turbo timer x2
Oil fittings and vacuum lines
HKS SSQ BOV
Greddy BOV
05-06 PnP Harness
07+ Pnp Harness
Pre-tapped oil pan
550cc Denso injectors
AEM F/IC
I think thats it. A lot of this stuff will be for sale seeing as though i won't need any of them. If anyone's interested in any parts please let me know.
What i still need to get:
Harware pack from Dezod
All new gaskets
Loctite
1 Step colder plugs
Tune
Exhaust
Now i have a question, would i be able to use my divided manifold with an undivided turbo while still using 2 wastegates or would that be pointless?
Last edited by Cwatz5219; 01-15-2010 at 05:33 AM.
#1858
did you get my pm?
turbo is a garrett t3/t4b stage 5 wheel, .60a/r compressor housing, .82a/r turbine housing....(I cant beleave after all this time i still know that)
if you got spare parts send em my way
turbo is a garrett t3/t4b stage 5 wheel, .60a/r compressor housing, .82a/r turbine housing....(I cant beleave after all this time i still know that)
if you got spare parts send em my way