Help Replacing Turbonetics T3/T4 E-50 Ball Bearing Turbo
#21
Originally Posted by Schuller
Originally Posted by ValenciaS
I was worried about purchasing another turbonetics turbo because i hear the seals blow easily, how would this turbo hold up to 300hp paul ? also is this a reliable turbo if you had any experience with it. so i just buy this turbo bolt it on and im ready to go , i dont have to buy any accessories to get it to fit on the turbonetcis kit , sorry for all the questions just want to be 100 % sure. thanks again for the help. I was also woundering paul if you guys do turbo repairs there i have the turbonetics t3/t4 turbo that came with the kit and the guy who i bought the kit from said the seals are blown , would you suggest on buying this precision turbo or getting this one repaired ?
You can have your turbo rebuilt by Turbonetics and also have them upgrade the center cartridge to water cooled. They also sell a water line kit. This solution seems to be working well for people. If you do get a new turbo get one that is water and oil cooled if you want to avoid problems as much as possible.
#22
Originally Posted by ValenciaS
thanks for all the help , im new to the whole turbo scene i really aprricaite it , just to confirm alll i need is this item
paul can you confirm thishttp://cgi.ebay.com/ebaymotors/ws/eB...m=130256262354
paul can you confirm thishttp://cgi.ebay.com/ebaymotors/ws/eB...m=130256262354
#24
Originally Posted by tcengel
It is 2", I just did the swap last week.
#26
Originally Posted by ValenciaS
Originally Posted by tcengel
It is 2", I just did the swap last week.
#27
Originally Posted by paul_dezod
Originally Posted by ValenciaS
Originally Posted by tcengel
It is 2", I just did the swap last week.
#28
Originally Posted by ValenciaS
Originally Posted by paul_dezod
Originally Posted by ValenciaS
Originally Posted by tcengel
It is 2", I just did the swap last week.
#29
oh ok ouch ^ , still love you guys lol , thanks again for all the help , so basically the silicon hose that came with the turbonetics will not fit on the end of the precision turbo(which is the compressor outlet ) is that correct paul or anyone else? bumping this question !
#31
Originally Posted by ValenciaS
oh ok ouch ^ , still love you guys lol , thanks again for all the help , so basically the silicon hose that came with the turbonetics will not fit on the end of the precision turbo(which is the compressor outlet ) is that correct paul or anyone else? bumping this question !
#33
Originally Posted by tcengel
No it won't fit, this will be very obvious once you do the install.
Also, you will need to clock the turbo. You can search on google for instructions on how to do that. It's very easy.
Also, you will need to clock the turbo. You can search on google for instructions on how to do that. It's very easy.
#34
basically i have to wait untill everything is installed all the FMIC piping is done then i clock the turbo in to position so the compressor part faces towards the FMIC with the silicon hose
#37
nice you have any pics at all i would love to drool for a bit lol , also is that your store on ebay that sells the silicone hose i need for that turbo to fit on the turbonetics kit ?
#38
Originally Posted by ValenciaS
nice you have any pics at all i would love to drool for a bit lol , also is that your store on ebay that sells the silicone hose i need for that turbo to fit on the turbonetics kit ?