My Adventures of getting a GReddy Turbo VIDS PICS DYNO pg8
#161
middle pic bottom row looks like you may have a slight leak on the exhaust manifold gasket. Make sure they didn't try to re use your old one thats what they did with mine and i had a small leak there
#166
Senior Member
Scikotics
SL Member
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: HMFIC Jensen Beach, FL
Posts: 3,314
Originally Posted by noTCed
middle pic bottom row looks like you may have a slight leak on the exhaust manifold gasket. Make sure they didn't try to re use your old one thats what they did with mine and i had a small leak there
#168
Senior Member
Scikotics
SL Member
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: HMFIC Jensen Beach, FL
Posts: 3,314
Originally Posted by RedneckwithanxB
dude in those vids you sound like a kid in a candy satore with a 5 dollar bill
#169
Senior Member
Scikotics
SL Member
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: HMFIC Jensen Beach, FL
Posts: 3,314
Originally Posted by zer0
It could be tuned better... looks like the basemap
#172
Originally Posted by Nychold
I don't think that's the issue here. I think it's more a case of charging him more than they should have. If they charged him for tuning, they'd better tune it.
He just said his bill did not have tunning on it.
#173
Originally Posted by rythmnsmoke
He just said his bill did not have tunning on it.
Originally Posted by etsnet
Oh yeah I paid the quoted price for a install and tune. This is real disappointing seeing as it's coming from a shop with such a good rep.
#175
Senior Member
Scikotics
SL Member
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: HMFIC Jensen Beach, FL
Posts: 3,314
I sent them an email over the weekend about the tq #'s not being on the sheet and called them this morning and left a message. I didn't get a call back but was sent an email reply for both email I sent and phone call I made. Here's what was said...
"Sometimes the torque #'s don't work. Its the pickup sensor that sometimes has issues on torque reading. Put the car on the dyno not sure what you meant on the tuning message you left me before. The car's tuned and should be running fine, I put that invoice together kinda quick and we ran the car off the base map that was provided in the E-manage and it ran fine."
To me that sounds like they installed the turbo and put the car on the dyno and it ran ok so made no adjustments. If they say it's fine then fine, but the point was I was charged $1900 for an install and a dyno run, not install and tune like it was supposed to be. I know if this car was tuned it could get 250whp but that's not really my main concern. The greddy base map isn't the best and I wanted the "best" to tune it the fastest they can while above all making it safe. If I wanted to run on the base map I could of had a weekend install party and it would only cost me food, drinks, and the cost of gas for giving rides.
Maybe I'll drive up to ZPI or RippMods. ZPI is closer and in about a week and a half I'll only be about 6hrs away instead of 15+hrs.
Any suggestions?
"Sometimes the torque #'s don't work. Its the pickup sensor that sometimes has issues on torque reading. Put the car on the dyno not sure what you meant on the tuning message you left me before. The car's tuned and should be running fine, I put that invoice together kinda quick and we ran the car off the base map that was provided in the E-manage and it ran fine."
To me that sounds like they installed the turbo and put the car on the dyno and it ran ok so made no adjustments. If they say it's fine then fine, but the point was I was charged $1900 for an install and a dyno run, not install and tune like it was supposed to be. I know if this car was tuned it could get 250whp but that's not really my main concern. The greddy base map isn't the best and I wanted the "best" to tune it the fastest they can while above all making it safe. If I wanted to run on the base map I could of had a weekend install party and it would only cost me food, drinks, and the cost of gas for giving rides.
Maybe I'll drive up to ZPI or RippMods. ZPI is closer and in about a week and a half I'll only be about 6hrs away instead of 15+hrs.
Any suggestions?
#178
Senior Member
Scikotics
SL Member
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: HMFIC Jensen Beach, FL
Posts: 3,314
Originally Posted by zer0
Japtrix cant tune the emanage? Try them first. Then either Kenny at ZPI or Perry at RIPP
Originally Posted by ProshopXB
Where are you moving to Paul?
#179
Originally Posted by etsnet
Originally Posted by RedneckwithanxB
dude in those vids you sound like a kid in a candy satore with a 5 dollar bill
#180
Senior Member
Scikotics
SL Member
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: HMFIC Jensen Beach, FL
Posts: 3,314
Haven't heard back from titan yet on if they made any adjustment to justify a tune. I'm gonna get my new exhaust and head down to Japtrix and see what they can do for me but not till I come back from vacation.
Thread
Thread Starter
Forum
Replies
Last Post
Flyfishfreak
PPC: Engine / Drivetrain
23
06-10-2016 02:55 AM
cessblood
PPC: Engine / Drivetrain
3
09-15-2015 06:50 AM
my06tc
PPC: Engine / Drivetrain
10
06-25-2015 12:18 AM
xa007xa
PPC: Engine / Drivetrain
0
03-31-2015 09:24 PM