phoenix_2o1_rising

does anyone know out there how to wire a n2o set up when you have a fuel solenoid from one company and a n2o solenoid from another, mainly a nos fuel and coldfusion nitrous. ???? pls help me out guys

CurbSide_Tuning

if thats the case, id follow the diagram for the solenoid from the nitrous line

05-RS1

one wire 12v, the other ground. polarity doesnt matter on the either wire. just be sure u know which wire is going to be doing the switching.

phoenix_2o1_rising

i have both going to 12v one with a toggle and 15A fuse, the other straight with a push button activation... the other two wires from the relay are ging to the ground, one straight to ground and the other thru the solenoids to the ground

i had a problem cause every company looked at had a diff set up with the wiring, like the wiring is set up the same but the relay is turned a diff way...

stl_tc_king

please dont take this the wrong way but do you know how a relay works?

phoenix_2o1_rising

yea