New TC Fuel Rail Available
#41
Senior Member
Music City Scions
SL Member
Thread Starter
Join Date: Oct 2007
Location: Tennessee
Posts: 186
I do do PayPal. And as far as contact, you can PM me, email me, instant message me, or I will have a website up very soon to buy directly through the site using a PayPal shopping cart.
#43
Senior Member
Music City Scions
SL Member
Thread Starter
Join Date: Oct 2007
Location: Tennessee
Posts: 186
Well, look what showed up today. Sorry for the poor pictures, they have alot of reflections in them, but I wanted to get them posted!
Should have something for the stock fuel line set-up very soon!
Oh, and as far as the polishing, the only way I could do that is with the next run. If you do decide to do that, it will have to be protected some how. You know that right?
Mike
Should have something for the stock fuel line set-up very soon!
Oh, and as far as the polishing, the only way I could do that is with the next run. If you do decide to do that, it will have to be protected some how. You know that right?
Mike
#46
Senior Member
Music City Scions
SL Member
iTrader: (1)
Join Date: Nov 2005
Location: Nashville, TN
Posts: 1,548
Originally Posted by cabrera1985
I have 440 injector which fuel rail will fit them?
There the one that come with the Greddy Kit.
Really interested and want to buy on ASAP!!!
There the one that come with the Greddy Kit.
Really interested and want to buy on ASAP!!!
#51
Senior Member
Music City Scions
SL Member
Thread Starter
Join Date: Oct 2007
Location: Tennessee
Posts: 186
Well, I have the first adapter and mounting plate made. Now I have to get some machined up to get anodized. And then get some mounting plates laser cut. Should have some soon. This will allow the use of the stock fuel line as is!
Stock rail with pulsating valve:
Aftermarket rail with adapter, mounting plate and pulsating valve:
2nd way of doing it: I am also trying to get some stock quick disconnect fittings so I can make up a fuel line to go from the stock hard line to the rail. If this 2nd way is used a Regulator would need to be used.
Stock rail with pulsating valve:
Aftermarket rail with adapter, mounting plate and pulsating valve:
2nd way of doing it: I am also trying to get some stock quick disconnect fittings so I can make up a fuel line to go from the stock hard line to the rail. If this 2nd way is used a Regulator would need to be used.
#56
Senior Member
Music City Scions
SL Member
Thread Starter
Join Date: Oct 2007
Location: Tennessee
Posts: 186
Just an update. Fittings are done and should be back from the anodizer tomorrow. Plates are back from the lasr cutters, now I have to tack the mounting nut to the back side, then get them painted. Should be done in a couple days! I'll post pictures when I get them done.
#57
Senior Member
Music City Scions
SL Member
Thread Starter
Join Date: Oct 2007
Location: Tennessee
Posts: 186
Well, fittings are back and adapter plates are done for a truely bolt on stock replacement. As it has been posted before, using the rail this way would be for looks only, but would allow you to upgrade your fuel system later as you begin to mod. PM me for more information. The following shows the different colors, fittings and adapters. We are proud to be the first to release a fuel rail for the tC! And one that will allow for a complete bolt on application!
Pictures of the rails only
Fittings available
Rail with stock adapter
Stock Adapter Fitting
Pictures of the rails only
Fittings available
Rail with stock adapter
Stock Adapter Fitting