NuERA's Built Engine & GT35R Turbo Project!UPDATE 6/28
#101
Originally Posted by Nu_ERA
Small update:
The car will be hopefully be started tomorrow as a Greddy Ultimate tuner is gonna be tuning the without a MAF so we'll see how that goes. Will be tuned for breaking-in so no big numbers yet lol.Now I am debating on goin with a 3inch exhaust all the way back with NO muffler or doing a 3 inch with a Apex-i N1 muffler.
The car will be hopefully be started tomorrow as a Greddy Ultimate tuner is gonna be tuning the without a MAF so we'll see how that goes. Will be tuned for breaking-in so no big numbers yet lol.Now I am debating on goin with a 3inch exhaust all the way back with NO muffler or doing a 3 inch with a Apex-i N1 muffler.
about your setup. i love it!!! with the exception of the intercoler. looks too boxy. but everything else is the heat. as long as it goes fast, who cares what it looks like though. awsome job.
although you might want to remove the duct tape from the head.
#102
I read a post in which someone did it and it worked ( no MAF) so I asked if they can and they (the tuning shop) said they'll try it. Now I was kinda skeptical with the intercooler size since it seems more boxy for a car with a huge air dam in front but Garret rated it for about 650+ and they usually underrate their intercoolers. If it proves to be not efficient for cooling I'll change it but fitment so far seems good to me.
Forgot about the tape lol
Forgot about the tape lol
#104
Nice set up man. will be a beast 4 sure.
did you stroke the motor ?
and why not ask COLT CAMS ? they make custom cams. maybe they can help us out so we can have a LIL more RPM to play with.
keep us updated. looking good.
did you stroke the motor ?
and why not ask COLT CAMS ? they make custom cams. maybe they can help us out so we can have a LIL more RPM to play with.
keep us updated. looking good.
#105
Well 318..... thanks for ruining my day lol
Just playin but I swear I remember reading a post in which someone deleted the MAF sensor with the Emanage Ultimate. I just want the car running on this till I can purchase a proper stand alone made for the tC.
Just playin but I swear I remember reading a post in which someone deleted the MAF sensor with the Emanage Ultimate. I just want the car running on this till I can purchase a proper stand alone made for the tC.
#106
Originally Posted by Nu_ERA
Well 318..... thanks for ruining my day lol
Just playin but I swear I remember reading a post in which someone deleted the MAF sensor with the Emanage Ultimate. I just want the car running on this till I can purchase a proper stand alone made for the tC.
Just playin but I swear I remember reading a post in which someone deleted the MAF sensor with the Emanage Ultimate. I just want the car running on this till I can purchase a proper stand alone made for the tC.
#107
nice build.. about time some more people on here are more focused on performance then how many LEDs they can stick in an a/c vent..
nice job so far man.. congrats!
and yea you can NEED the maf. ..it will not work with out on this car.
nice job so far man.. congrats!
and yea you can NEED the maf. ..it will not work with out on this car.
#108
Originally Posted by Brett
Originally Posted by Nu_ERA
Well 318..... thanks for ruining my day lol
Just playin but I swear I remember reading a post in which someone deleted the MAF sensor with the Emanage Ultimate. I just want the car running on this till I can purchase a proper stand alone made for the tC.
Just playin but I swear I remember reading a post in which someone deleted the MAF sensor with the Emanage Ultimate. I just want the car running on this till I can purchase a proper stand alone made for the tC.
Now isn't there a limit the MAF can take? What turbos were you guys using with the Emanage @ 18-20 psi? For reference mine is a GT35R
BTW thanks for the comments
#109
Originally Posted by Nu_ERA
Originally Posted by Brett
Originally Posted by Nu_ERA
Well 318..... thanks for ruining my day lol
Just playin but I swear I remember reading a post in which someone deleted the MAF sensor with the Emanage Ultimate. I just want the car running on this till I can purchase a proper stand alone made for the tC.
Just playin but I swear I remember reading a post in which someone deleted the MAF sensor with the Emanage Ultimate. I just want the car running on this till I can purchase a proper stand alone made for the tC.
Now isn't there a limit the MAF can take? What turbos were you guys using with the Emanage @ 18-20 psi? For reference mine is a GT35R
BTW thanks for the comments
#112
SC61 Turbo
DTA S60pro Stand Alone w/3bar map sensor.
No MAF
Not finished so I can't tell you how well it worked out, but I don't think anything will be a problem except for the drive by wire, but I'll cable that f**ker if need be.
BTW... Gorgeous job, I love it all and I'm jealous of that intake. Need more pics of the whole set up especially that intake!
DTA S60pro Stand Alone w/3bar map sensor.
No MAF
Not finished so I can't tell you how well it worked out, but I don't think anything will be a problem except for the drive by wire, but I'll cable that f**ker if need be.
BTW... Gorgeous job, I love it all and I'm jealous of that intake. Need more pics of the whole set up especially that intake!
#113
Well we have a problem. After getting everything hooked up and properly checking the fuel lines, injectors, etc. The car WILL NOT turn over. In fact there seems to be no spark. Now could my coil be fried cause the Emanage Ultimate is programmed correctly from what it seems ( JP 8 is set from 1-2 to 2-3) and no fuses are blown.... any ideas. Kinda freaked here
#114
Originally Posted by dskinner
Well we have a problem. After getting everything hooked up and properly checking the fuel lines, injectors, etc. The car WILL NOT turn over. In fact there seems to be no spark. Now could my coil be fried cause the Emanage Ultimate is programmed correctly from what it seems ( JP 8 is set from 1-2 to 2-3) and no fuses are blown.... any ideas. Kinda freaked here
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
My mistake on the different user lol. I posted thinking I was logged in to my username and it was my friends username Sorry for the confusion but the problem is real
#115
Originally Posted by Nu_ERA
Originally Posted by dskinner
Well we have a problem. After getting everything hooked up and properly checking the fuel lines, injectors, etc. The car WILL NOT turn over. In fact there seems to be no spark. Now could my coil be fried cause the Emanage Ultimate is programmed correctly from what it seems ( JP 8 is set from 1-2 to 2-3) and no fuses are blown.... any ideas. Kinda freaked here
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
My mistake on the different user lol. I posted thinking I was logged in to my username and it was my friends username Sorry for the confusion but the problem is real
#116
Originally Posted by paul_dezod
Originally Posted by Nu_ERA
Originally Posted by dskinner
Well we have a problem. After getting everything hooked up and properly checking the fuel lines, injectors, etc. The car WILL NOT turn over. In fact there seems to be no spark. Now could my coil be fried cause the Emanage Ultimate is programmed correctly from what it seems ( JP 8 is set from 1-2 to 2-3) and no fuses are blown.... any ideas. Kinda freaked here
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
My mistake on the different user lol. I posted thinking I was logged in to my username and it was my friends username Sorry for the confusion but the problem is real
#117
Originally Posted by Nu_ERA
Originally Posted by paul_dezod
Originally Posted by Nu_ERA
Originally Posted by dskinner
Well we have a problem. After getting everything hooked up and properly checking the fuel lines, injectors, etc. The car WILL NOT turn over. In fact there seems to be no spark. Now could my coil be fried cause the Emanage Ultimate is programmed correctly from what it seems ( JP 8 is set from 1-2 to 2-3) and no fuses are blown.... any ideas. Kinda freaked here
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
My mistake on the different user lol. I posted thinking I was logged in to my username and it was my friends username Sorry for the confusion but the problem is real
#120
Originally Posted by 318_tC
No deleting the maf with emanage ultimate sorry