Originally Posted by tCZion

Back in bussiness.....here is another dyno. TRD Supercharger stock pulley, header and custom CAI w/ Fujita Air Filter

Originally Posted by Xero187

Dezod S1 2.5" Turbo Back Exhaust
Greddy Ultimate, Pressure Sensor, Black Box
Custom Conservative Tune
245/270 whp/wtq
7 psi
Dyno Dynamics

Originally Posted by ucyib2papi

yay, new numbers.

306 hp / 322 tq on 8.5psi

Originally Posted by ucyib2papi

will have dyno sheet today, but no scanner.

greddy kit, w/ 38mm tial wg, invidia s pipe, megan mid pipe, custom dual exhaust, stg3 clutch, lightened flywheel, crank pulley, speed source engine mounts and wr dampener
thats about all i got that is somewhat related

Originally Posted by Enrique9876

hey all i will throw up my dynograph as soon as i can .. but i was just dyno'ed at 292 hp and 333ft/lb ... i run a gt30r on a greddy emanage ult.

Originally Posted by redrumtc

so the tc went on the dynopack today. Je called me and said at 8psi it made 303whp and 299tq without the zex sprayer. I will post the dyno sheet tommrow I think those numbers are good for 8 psi. Now once the turbo has some miles on it we will se what je can do at 11psi were thinking close to 400whp.

Originally Posted by ScionCREW

Sup guys !! Here is the latest dyno charts on the sfwd tC that i could find . Their are two dyno runs their one is at 20psi the other one is at 30psi.


http://itsmyscion.com/ScionCREW/phot...5a739ec55776/1

Originally Posted by hooperstar

here are my mods
1. custom cai
2. mmw headers and s-pipe
3. custom s-pipe 2.5 inch exhaust
4. unorthodox lighted crank pully
5. nst water pump pully and alternator pully
6. lighted flywheel and clutchmasters 6puck
7. nology wires
8. unichip
9. 75 shot

http://www.youtube.com/watch?v=v3t5ms4Zheo


these are my numbers without the unichip and also my bottle pressure was only at around 800 psi. If i was at 950-1000 psi I would have hit 300whp Tell me what u guys think thanks

Originally Posted by j3st3r

Here is mine.

Originally Posted by j3st3r

Max boost was 25psi, and thanks!

Originally Posted by jphung71

here is my dyno forthe set up listed below.

[/list]

Originally Posted by AzNjohnny88

Greddy Turbo Kit
E-manage Ultimate
3inch Custom Exhaust

Originally Posted by AzNjohnny88

just 8 pounds

Originally Posted by 20tCDude05

I am running 8-9 lbs with a Dezod kit on a 2.25" exhaust and I have 259WHP and 287WTQ

Originally Posted by unvdistc

271HP 267 TQ

Originally Posted by army11b

I just dynoed my car today,, did 220whp and 210tq. zpi stage 0 with full 2.5' exhaust, walbro fuel pump, 550 injectors and emanage ultimate, the dyno/tuner guy said that there was a lot of heat soak because of no IC,,, of course,, but im hoping to get the Turbotoyotas ZPI ic/piping kit once they come out with it. Hopefully ill post the dyno sheet tonight.

Originally Posted by army11b

Got 265whp 260tq on 8psi with my new ic and piping kit from turbotoyotas, will try to scan dyno sheet when i go to kinkos to make copies of dyno :D

Originally Posted by 760sciontc08

at 8.3
294 hp

Originally Posted by 760sciontc08

oh ya dezod s1 kit
08

Originally Posted by redrumtc

new #s for my turbo set up 8psi 308whp and 295lbft

Originally Posted by enjoithis

08 tC runing Dezod S1 Turbo @ 8.5psi , full 2.5" catless exhaust. AEM F/IC Tuned by Ripp (Engine stumbles over 6k rpms)





(Need a better tune)

Originally Posted by silvrtc300

4-- whp on 15 psi.. full built erl motor head from dezod TT manifold, 3" Downpipe from TT. P-tuning full 3" exhaust. Greddy Ulimate tune from RIPP MODS. and more to come.. LOTS more..

Originally Posted by silvrtc300

for got to mention GT3076R .82 a/r 700 cc Mishimoto radiator

Originally Posted by jwaggz82

please change my specs in the first post. im now at 268whp/228trq at 10.5lbs

http://www.detailedhosting.com/users...o-20080722.jpg

Originally Posted by Mr_Meaty