20tCDude05

Will it fit my Dezod 2.5" downpipe if I get the s-pipe?

Guest

We have no idea, what that 2.5 downpipe looks like, but probably not. I believe there's a member on here trying to sell our 3" s-pipe that was modified to fit the dezod kit in exchange for an unmodifed ptuinng 3" s-pipe. You want want to do a search on this.

MrC

20tCDude05

That really sucks because I really want the P-Tuning exhaust. Guess I will have to go custom, ugh.

Guest

We designed our s-pipe to be similar in fitment to the stock s-pipe. Therefore, if your turbo kit "down-pipe" mate up to a factory s-pipe, then our 3" Turbo-Back system will work with your turbo kit without modifications. Otherwise, you can still run our 3" S-Back exhaus system.

Regards,
Mike @ PTUNING

paul_dezod

To help Neil a customer of ours, does your exhaust mate to a stock s-pipe?

java09

isnt that what your looking for? no?

20tCDude05

Hmm, sounds a little risky. As in getting it and having it not fit. Hmm, not sure what to do.

CarbonXe

iTrader: (1)

To answer for PTuning, but not actually 'for' PTuning...

I had my S-Pipe back PTuning exhaust on with the stock manifold and stock S-Pipe and it fit perfectly. However, the S-Pipe back comes with a small elbow section which connects the PTuning muffler section to the stock S-pipe (PTuning Spipe comes back further to match up to the muffler section).

From there, I installed the turbo and downpipe, then the PTuning SPipe fit perfectly to my TT 2.5" downpipe and 3" s-pipe back (minus that small elbow piece).

CarbonXe

iTrader: (1)

The smallest section is the piece PTuning provides with the SPipe back to allow the exhaust to match up with the stock S-Pipe.

With the PTuning S-Pipe in place, that small piece is no longer needed, as the PTuning SPipe extends farther than the stock SPipe.

Guest

Our 3" S-Back exhaust system will mate right up to the stock s-pipe.
Again, with our 3" Turbo-Back exhaust (the S-Pipe section), was designed to be similar in fitment to the stock s-pipe.

Regards,
Mike @ PTUNING

java09

carbonXE.. i need a ptuning exhaust asap. send me yours! k thnx! k bye!

20tCDude05

What about Dezod`s s-pipe? That's what I have...

CarbonXe

iTrader: (1)

I have a better idea, buy a new one from PTuning.

Link is in the sig .

Guest

Confirmed fitment of our 3" TURBO-BACK EXHAUST SYSTEM:
http://www.ptuning.com/html/search-r...word=PTEXH1001
*GReddy turbo kit.
*Turbonetics turbo kit.
*SP turbo kit (will need our doughnut gasket - part number: PTPGSKT1-250).
*ZPi turbo kit (will need our doughnut gasket - part number: PTPGSKT1-250).
*Any custom turbo kit that works with the stock s-pipe.

Confirmed fitment of out 3" S-BACK EXHAUST SYSTEM:
http://www.ptuning.com/html/search-r...word=PTEXH1000
*GReddy turbo kit.
*Turbonectics turbo kit.
*Dezod turbo kit.
*SP turbo kit.
*ZPi turbo kit.
*Any custom turbo kit that works with the stock s-pipe.

Regards,
Mike @ PTUNING

java09

i may just be buying a ptuning here in the next few hours. gotta ask the boss first. she wears the pants...

paul_dezod

Neil, this means that it will mate to our S-pipe.

Why? Because our s-pipe mates to a stock exhaust.

Guest

We believed the Dezod turbo kit was designed where the included S-pipe section is not the same in size (length) as the stock s-pipe. Therefore, you will have to run the Dezod included s-pipe with their turbo kit. You can still run our full 3" turbo-back system. However, you will need to modify our 3" s-pipe (length) to be similar to the Dezod included s-pipe. Otherwise, you will need to run our 3" S-Back exhaust system.

Regards,
Mike @ PTUNING

rhythmnsmoke

I don't think there is any question MrC or Ptuning have NOT answered with data that backs it up.... They definitely cross their T's and dot their I's.

Guest

We just been fortunate enough to work on a lot of turbo tC with various turbo kits, and have been given the opporttunity to install our 3" exhaust on most of the turbo setup currently offered for the tC.

We will continue to confirm fitment of our exhaust on different turbo setup for the tC.

Regards,
Mike @ PTUNING

rhythmnsmoke

That's what I call R&D.