Peakboost(Turbotoyotas) TC turbo kit offer UPDATES**
09-05-2007, 06:57 PM
#1
Senior Member
SL Member
Thread Starter
Join Date: Nov 2006
Location: Arizona
Posts: 1,480
Peakboost(Turbotoyotas) TC turbo kit offer UPDATES**
We would like to pass on a special offer on our Scion TC turbos kits.
This is not a group buy but will be offered to the 1st 5 customers who wish to purchase a turbo kit from us.
For those not looking for a complete kit please ask me about our manfiold/downpipe combo specials
The offer includes:
- Stainless Steel "Equal Length" design T3 turbine flanged with a Tial 38mm wastegate flange
- Garrett T3/T4 spec turbo in your choice of trim and AR
- Tial 38mm wastegate (with spring rate of choice)
- 2.5" 2 piece downpipe and s-pipe with vband connection at split.
- 2.5" aluminum intercooler piping with silicone couplers and t-bolt clamps. Piping comes powdercoated black.
- Intercooler . Does not require any cutting of the crashbar or front bumper.
- 3" Intake pipe with K & N air filter(also powdercoated black)
- Blow off valve of choice, Tial or Greddy.
- Steel braided oil feed/drain lines
- Dump tube for Tial 38mm wastegate
- Turbotoyotas vacuum manifold with fittings
- The factory fans/shroud has to be removed and replaced with 2 slim line fans(included in the kit) that mount in front. This leaves plenty of room for those who wish to run an aftermarket radiator.
- all installation hardwarde and installation instructions.
- HPC coating of choice for the manifold, downpipe/s-pipe, dumptube and turbine housing on turbo. Either the "sterling silver"or Black
- Polished Compressor housing of turbo
- Set of 4 RC 550cc injectors with clips
- Greddy Emanage (plug n play adapter required for easy installation/not inlcuded)
Price: $4275.00 shipped
** AEM FIC management upgrade: $100.00**
Manifold picture:
Polished and HPC coated (black) turbo
HPC coated (black) manifold
Other options and upgrades available at additional costs:
- Plug N Play adapter for Emanage with injector and ignition control
-Plug N Play adapter for AEM FIC
- Tial 44mm wastegate upgrade
- 3" Downpipe/S-pipe combo upgrade
-Black Anodizing of intercooler
- Polishing of manfiold, downpipe, dumptube
- Polish/powdercoat of compressor housing (custom colors avail)
- Larger Garrett Bushing and Ball Bearing turbo upgrades
Please call me at 480-510-4689
or IM
or email me at Todd@Whyindustries.com
Regards-
Todd
This is not a group buy but will be offered to the 1st 5 customers who wish to purchase a turbo kit from us.
For those not looking for a complete kit please ask me about our manfiold/downpipe combo specials
The offer includes:
- Stainless Steel "Equal Length" design T3 turbine flanged with a Tial 38mm wastegate flange
- Garrett T3/T4 spec turbo in your choice of trim and AR
- Tial 38mm wastegate (with spring rate of choice)
- 2.5" 2 piece downpipe and s-pipe with vband connection at split.
- 2.5" aluminum intercooler piping with silicone couplers and t-bolt clamps. Piping comes powdercoated black.
- Intercooler . Does not require any cutting of the crashbar or front bumper.
- 3" Intake pipe with K & N air filter(also powdercoated black)
- Blow off valve of choice, Tial or Greddy.
- Steel braided oil feed/drain lines
- Dump tube for Tial 38mm wastegate
- Turbotoyotas vacuum manifold with fittings
- The factory fans/shroud has to be removed and replaced with 2 slim line fans(included in the kit) that mount in front. This leaves plenty of room for those who wish to run an aftermarket radiator.
- all installation hardwarde and installation instructions.
- HPC coating of choice for the manifold, downpipe/s-pipe, dumptube and turbine housing on turbo. Either the "sterling silver"or Black
- Polished Compressor housing of turbo
- Set of 4 RC 550cc injectors with clips
- Greddy Emanage (plug n play adapter required for easy installation/not inlcuded)
Price: $4275.00 shipped
** AEM FIC management upgrade: $100.00**
Manifold picture:
Polished and HPC coated (black) turbo
HPC coated (black) manifold
Other options and upgrades available at additional costs:
- Plug N Play adapter for Emanage with injector and ignition control
-Plug N Play adapter for AEM FIC
- Tial 44mm wastegate upgrade
- 3" Downpipe/S-pipe combo upgrade
-Black Anodizing of intercooler
- Polishing of manfiold, downpipe, dumptube
- Polish/powdercoat of compressor housing (custom colors avail)
- Larger Garrett Bushing and Ball Bearing turbo upgrades
Please call me at 480-510-4689
or IM
or email me at Todd@Whyindustries.com
Regards-
Todd
09-05-2007, 10:46 PM
#8
Senior Member
SL Member
Join Date: Feb 2006
Location: Blue Springs, MO
Posts: 2,184
hey Todd no meaning to threadjack or anything and I know you are going through some hard times, but if you could get back to me on some of the questions I had for you (sent you a pm and an e-mail) that would be great because I am looking to get the ball rolling soon on boosting my ride... thanks!
09-06-2007, 04:57 PM
#15
Senior Member
SL Member
Thread Starter
Join Date: Nov 2006
Location: Arizona
Posts: 1,480
mmm... please have this deal when my school refund check comes around..thanks.,
Hey Todd, how's this kit compare to the kit I ordered?
do you take trade-in kits????
WOW! That price included HPC coating, polished compressor, injectors and emanage?
That's a great deal? Hell, it's a great deal WITHOUT all the extras!
That's a great deal? Hell, it's a great deal WITHOUT all the extras!
nice stuff. congrats.
i still want a t shirt
i still want a t shirt
Will have a few more additions later on today
Regards-
Todd
please let it be what im thinking it is, (with pics). 
09-06-2007, 09:16 PM
#18
Senior Member
SL Member
Join Date: Mar 2005
Location: SC
Posts: 1,436
do you take trade-in kits????
pics on profile
09-06-2007, 10:06 PM
#20
Senior Member
SL Member
Thread Starter
Join Date: Nov 2006
Location: Arizona
Posts: 1,480
new stuff eh? please let it be what im thinking it is, (with pics).
Sound performance kit with ball bearing option prescision turbo 3431RE, intercooler, and return fuel setup, paid too much
pics on profile
pics on profile
Regards-
Todd