MIAPLAYA

Tapping the pan is easy. Turbonetics even provides the tap you need. There is no welding required...

mattssi

On my lex, we didn't even need to remove the pan.... drilled the hole, used the tap, ran some oil through to remove any possible shavings, then put the fitting in. pretty easy

MIAPLAYA

^^^ Absolutely correct. Same thing on my Z and my buddies G.

zer0

videos?

MIAPLAYA

They will be re-hosted by noon tomorrow. I am uploading them to a site tonight...

jonathanlepierson

thanks for the info guys...my friend told me about the method you guys used... but what are the odds your going to get all possible shavings out?

MIAPLAYA

The odds are very good. If you use some grease on the tap while tapping the threads it will hld onto most of the shavings..Everything else can be blown out with compressed air..

jonathanlepierson

would oil work as good as highpressure air ...if not whats the method of blowing the stuff out.. i can only think of sticking the blowing end down where you pour the oil in

jonathanlepierson

i think it was you "miaplaya" that said the uni chip would keep the "cel" off but what if your having a problem with the o2 sensor on the s pipe and its causing my cel to come on?

MIAPLAYA

The Unichip will not throw a CEL for the lack of a cat if thats what you are asking. As for the oil I think maybe we are mis-understanding each other. When you drill and tap the oil return you drop the lower oil pan and drill and tap it with some grease to collect most of the shavings. Then you blow out the hole with air. Install the fitting and then re-install the lower pan

jonathanlepierson

we are mis-understanding miaplaya...i'v heard people say wars start over such such situations as this

MIAPLAYA

No war starting here. When I have the install instructions I'll post them and you'll see what I mean.

MIAPLAYA

All videos including dyno videos now hosted here:
http://www.petn.us/scion/

Thanks to Jamia for hosting them!!

Jamia

Glad to help man.

Now get to downloading these videos.

MIAPLAYA

Much appreciated!!

zer0

How audible is the BOV, videos dont do justice. I want people to know when I rev behind them I mean business...

MIAPLAYA

its audible within a 1 car range if you rev it hard...

jonathanlepierson

i picked up my turbonetics kit from fedex today.... SO back on subject miaplaya.... the kit has a punch so no drilling required....then the instructions says exactly what you told me"miaplaya". ...grease the tap so it collects the shavings.....for someone that calls himself a noob"miaplaya" you know quite a bit of good info....but you might have been refering to promoting....but who cares the kits beautifull prob more beatifull than the s you be playing...the kit is exact as seen on turbonetics...so no douts there...props to turbokits.com

mattssi

Can you take a pic of some components and misc items included? any pix of instructions, etc would be awesome too. Thanks!

jonathanlepierson

my kits a few miles away at the moment"at storage." so maybe tomarrow or maybe miaplaya will have them up by then...but since it took so long to get the videos up it might be a week or to..just kidding... in the meen time i think you should know that the kits installation process is simple but yet correct....and everything needed to install the kit is coming along with the turbo kit and its all in the same box...