quick f/ic question
#1
quick f/ic question
I have an 06 tC. If I go ahead and install the F/iC with no map on it will I have any problems? also do I need to run the vacuum boost line to the f/ic if im not running boost?
Thanks
Thanks
#4
ok, then no you shouldn't need to hook up the vacuum signal. you would just set it up by tps position and rpms. that is if you are running the nitrous and 100% throttle which is the only way you should.
#6
Originally Posted by 08superwhite
ok, then no you shouldn't need to hook up the vacuum signal. you would just set it up by tps position and rpms. that is if you are running the nitrous and 100% throttle which is the only way you should.
yeah its got a full window switch system first gear lockout, 3000-6000rpm spray window, and tps WOT switch.
hooking it up without a tune on it wont give me any problems will it?
#7
Originally Posted by Mr_Meaty
You cannot hook it up with no map as it will make everything zeroed out...you will need a base map for stock injectors.
They have one on the aempower.com forums.
They have one on the aempower.com forums.
#8
Originally Posted by Mr_Meaty
You cannot hook it up with no map as it will make everything zeroed out...you will need a base map for stock injectors.
They have one on the aempower.com forums.
They have one on the aempower.com forums.
#9
Originally Posted by garabaldy
Originally Posted by Mr_Meaty
You cannot hook it up with no map as it will make everything zeroed out...you will need a base map for stock injectors.
They have one on the aempower.com forums.
They have one on the aempower.com forums.
i second that
#10
yeah...your probably right...but when I put the F/ic on my car wiht no map, it sputtered worse then when I had nothing on at all...of couse this was after I installed my kit.
I also spoke with dezod, and they said a 0 map is blank and will not work as it's not a base map...it's not ONLY the fuel map but the ignition that needs to be adjusted to make a stock car run stock...i think....i dunno, but good to have just in case, right?
I also spoke with dezod, and they said a 0 map is blank and will not work as it's not a base map...it's not ONLY the fuel map but the ignition that needs to be adjusted to make a stock car run stock...i think....i dunno, but good to have just in case, right?
#17
ok the map you sent man man instantly killed the car, and the zeroed out map makes it bounce like hell I unplugged the F/ic (harness is still in) and now car wont even start.