RIPPMODS Supercharger cams now available
10-03-2006, 11:13 PM
#81
Senior Member
Scikotics
SL Member
Thread Starter
Join Date: May 2006
Location: Bergen County, NJ
Posts: 892
Originally Posted by zer0
Yea it was a last minute thing, they dried the track and let us run. Everyone was spinning, fastest time with radials(munch) was a 9.3, I know with better track prep, karl with some radials could have done some damage.
When I finally caught up to him around halfway down the track I realized "oh wait, there's a window lock button on my door, isn't there?" lol
Falken 512's are just Falken awful for dragging
10-29-2006, 09:35 PM
#84
Senior Member
SL Member
Join Date: Oct 2006
Location: Strong Island, New York
Posts: 152
Ripp mods tuned my tc 2..... i think im the second tc they tuned and i had the same boost leak from the s/c and still managed to get 266whp at 7lb of boost......next step cams and meth injection and fix the boost leak
10-30-2006, 12:37 AM
#85
Originally Posted by ziobep
Ripp mods tuned my tc 2..... i think im the second tc they tuned and i had the same boost leak from the s/c and still managed to get 266whp at 7lb of boost......next step cams and meth injection and fix the boost leak
WHHATTT!!!! Holy Moly!! That is sweet! I bet your flywheel played a nice part in that because karl I know has the stock one. Is your flywheel light or also a diff size? Did you have any boost problems before the management (meaning - were you pulling the full 9lbs)? Please give more details because those are some killer numbers for someone w/o methanol or cams.
10-30-2006, 12:46 AM
#86
Senior Member
SL Member
Join Date: Oct 2006
Location: Strong Island, New York
Posts: 152
i have a light fidanza flywheel.... well i have a 9.5lb pully on now but the bosch 110 bpv is only holding 7lbs ..... time to go forge or maybe ZPI TurboXS Racing Bypass Valve RBV-25 but i havent seen anyone using this yet......next steps 12lb pulley Ripp cams and ripp meth injection kit..... check them out there good at what they do.. the guy perry who tuned the car is like an evil scientist when it comes to that stuff and the owner ross has any almost any answer your looking for, hes like an encyclopedia, def had some good tips from him
10-30-2006, 01:28 AM
#88
Just so you guys know I was talking with mike (ziobep) - he was running 7lbs boost out of his 9.5 pulley so the bpv leaking is not a 100% fact yet. He is not sure. But he said he was at one point but it dropped down. Both him and karl have the other NST pulley combo so im wondering if the tension pulley teamed up w/ the full NST combo is the issue and not the bpv leaking. NST is a great company ...its the tension pulley that we know for a fact needs to be looked at because the spring needs to be stiffer.
10-30-2006, 02:25 AM
#89
Senior Member
Scikotics
SL Member
Thread Starter
Join Date: May 2006
Location: Bergen County, NJ
Posts: 892
BTW, I am also running a fidanza flywheel.
And yes, we already know that we need new tensioner pulleys
Edit: And using a GATES belt will get rid of that slippage. I'm running 11lb which is within variance for a 12lb pulley.
And yes, we already know that we need new tensioner pulleys
Edit: And using a GATES belt will get rid of that slippage. I'm running 11lb which is within variance for a 12lb pulley.
08-01-2007, 10:28 PM
#98
Senior Member
SL Member
Join Date: Jan 2006
Posts: 1,761
Originally Posted by release2063
a little fyi, trd took the vortech sc and put some parts to fit the tc and now call it the trd sc, look it up
Thread
Thread Starter
Forum
Replies
Last Post
steeze69
Scion tC 1G Drivetrain & Power
1
05-24-2021 02:57 AM
rain7905643
PPC: Engine / Drivetrain
3
06-13-2018 05:29 AM
