Slowly letting the cat out of the bag .....Dyno sheet inside
04-12-2007, 02:27 AM
#1
Senior Member
SL Member
Thread Starter
Join Date: Nov 2006
Location: Arizona
Posts: 1,480
Slowly letting the cat out of the bag .....Dyno sheet inside
I'm not one to play all my cards at once....
Same kit, same car, same setup, same psi, pump gas, not as rich but room for more, same with the timing.
GT3071R kit @9.9psi( so 10)
The fun has only begun...
Regards-
Todd
PS- and YES its at the wheels, just a setting in the software.
Same kit, same car, same setup, same psi, pump gas, not as rich but room for more, same with the timing.
GT3071R kit @9.9psi( so 10)
The fun has only begun...
Regards-
Todd
PS- and YES its at the wheels, just a setting in the software.
What psi is that at again? And which turbo?
04-12-2007, 04:23 AM
#5
Senior Member
Scikotics
SL Member
Join Date: Oct 2004
Location: Florida
Posts: 3,689
Nice WHP at 10 PSI BUT:
I assume thats the problem with larger turbo's:
You from what i could see only made 180 WHP @ 3000k
You also didnt hit 300 WHP until 5500k
This may be good for upper RPM's, But from a 2nd gear roll, or a dead stop, i dont think this would be an IDEAL choice.
What AFR did you guys Finish with?
*I am not bashing this kit by any means*
I assume thats the problem with larger turbo's:
You from what i could see only made 180 WHP @ 3000k
You also didnt hit 300 WHP until 5500k
This may be good for upper RPM's, But from a 2nd gear roll, or a dead stop, i dont think this would be an IDEAL choice.
What AFR did you guys Finish with?
*I am not bashing this kit by any means*
04-12-2007, 06:31 AM
#8
Try a 4th gear pull next time instead of 3rd... may load up better and show better bottom end, might loose some of that top though Have a stock comparo dyno sheet...? That is what matters anyways. Looks like a blast to bang through the gears! I sure know my 3076R is a freakin blast! 2nd gear rolls are vicious with massive wheel spin. People can talk paper all day long, but reality on how the larger setups running an equal lenght work is amazing. Somthing that has to be driven to be understood in any way shape or form.
People need to think about how fast even a stock tc running say 3K rpm in 2nd gear will jump to say 4K rpm. The jump is so fast it is insane, nail the throttle and all you hear is wheel spin almost instant! I have to get some locals to feel how the larger setup works that are running the smaller turbos. I have driven many setups with smaller units and I by far like mine "yours is very very similar" much better.
Have a stock comparo dyno sheet...? That is what matters anyways. Looks like a blast to bang through the gears! I sure know my 3076R is a freakin blast! 2nd gear rolls are vicious with massive wheel spin. People can talk paper all day long, but reality on how the larger setups running an equal lenght work is amazing. Somthing that has to be driven to be understood in any way shape or form.People need to think about how fast even a stock tc running say 3K rpm in 2nd gear will jump to say 4K rpm. The jump is so fast it is insane, nail the throttle and all you hear is wheel spin almost instant! I have to get some locals to feel how the larger setup works that are running the smaller turbos. I have driven many setups with smaller units and I by far like mine "yours is very very similar" much better.
04-12-2007, 01:45 PM
#10
Originally Posted by yamaha16bw
those are awsome number. I love that people are hitting over 300whp under 10 or at 10 psi.
Edit: 1 of our 1st 07 kits did that on 10 PSI.
Great job Todderoo!
04-12-2007, 02:49 PM
#12
Originally Posted by rhythmnsmoke
Todd
Numbers looks good.
I like what you are doing, keep up the good work.
PS...pay no attention to those trying to down play it or still your thunder.
Numbers looks good.
I like what you are doing, keep up the good work.
PS...pay no attention to those trying to down play it or still your thunder.
04-12-2007, 02:54 PM
#13
Originally Posted by Garage1217
Exactly. good work
THAT WAS WHAT I WAS SAYING BEFORE! Why is everyone misconstruing what I have been saying lately. GEEESH!
04-12-2007, 03:06 PM
#14
Senior Member
Music City Scions
Scikotics
SL Member
Join Date: Jun 2005
Location: TN
Posts: 16,747
Originally Posted by paul_dezod
Originally Posted by Garage1217
Exactly. good work
THAT WAS WHAT I WAS SAYING BEFORE! Why is everyone misconstruing what I have been saying lately. GEEESH!
Didn't you know....
All of us Scion owners have tampons stuck up our nose, so all the Boost talk is sticking to our brains and causing Delusions of Grandure.
04-12-2007, 03:07 PM
#15
Originally Posted by rhythmnsmoke
Originally Posted by paul_dezod
Originally Posted by Garage1217
Exactly. good work
THAT WAS WHAT I WAS SAYING BEFORE! Why is everyone misconstruing what I have been saying lately. GEEESH!
Didn't you know....
All of us Scion owners have tampons stuck up our nose, so all the Boost talk is sticking to our brains and causing Delusions of Grandure.
Good 1 Trav!
04-12-2007, 03:10 PM
#17
Senior Member
Music City Scions
Scikotics
SL Member
Join Date: Jun 2005
Location: TN
Posts: 16,747
Originally Posted by paul_dezod
Originally Posted by rhythmnsmoke
Originally Posted by paul_dezod
Originally Posted by Garage1217
Exactly. good work
THAT WAS WHAT I WAS SAYING BEFORE! Why is everyone misconstruing what I have been saying lately. GEEESH!
Didn't you know....
All of us Scion owners have tampons stuck up our nose, so all the Boost talk is sticking to our brains and causing Delusions of Grandure.
04-12-2007, 03:40 PM
#19
Senior Member
SL Member
Join Date: Jul 2005
Posts: 2,534
Originally Posted by mikescion
i would like to see what that turbo can do on... lets say 15psi. That would be sweet is this turbo kinda like the 35r it likes more boost right??
