Bobo06tc

Im running a greddy kit at 8 psi I know I need to run ngk step 2 colder plugs but I can't seem to find them or the part number so oreilys can get me some and none of them could figure it out either any and all help is greatly appreciated

tom0613

iTrader: (2)

no u should be fine with what u got just make sure always use premium fuel, a 2 step colder plug is not necessary.

tom0613

iTrader: (2)

also are u tuned most tuners take a look at your plugs before and during pulls. some even go as far as taking temps with a laser on each cylinder which is not accurate but helps i guess.

Bobo06tc

Im using ngk now and gapped it to .35 instead of .44 my kit came off a friends Tc with the Aem fic tuned at 8 lbs but he was using 2 step colder plugs when it was tuned but can't remember the part number...im going ti get retuned in 3 weeks

Bobo06tc

Bkr8eix

Bobo06tc

Gotta figure out what to gap at think ima gap about. 30

PeArLwHiTe07tC

iTrader: (2)

for 8 psi, id say between .34-.30 should suffice. u shouldnt have to run 2 steps colder. ull be just fine with 1 step colder. im running 1 step colder @ 12psi with no issues at all.

crush02342002

iTrader: (2)

bkr8eix come pregapped to .030...but always check. as stated 2step colder plugs are not needed for the amount of boost ran. 1step colder would work just fine. Iv gone as far as using stock plugs gapped to .030 for low boost.

just so you know the part numbers for what plugs

ngk brand
bkr6eix-11 =stock plugs pregapped to .044 (something of that nature)
bkr7eix =1 step colder plugs pregapped to .030
bkr8eix =2 step colder plugs pregapped to .030

the -11 at the end of the part number denotes the plug gap being .044

Bobo06tc

Ok thanks guys

thendawg

iTrader: (2)

Id go with 1 step colder. No need for 2 step. As for gap .030 will be fine, just double check the gap before install. Ive found .030 is good up until about the 18 psi range, passed that, youll want to gap them down. I run my BKR8EIX's at .022 gap with 25-28 psi on E85 and no spark blowout

Bobo06tc

Hey crush u know Jose from houston that u tuned the greddy kit on his Tc...im running his old greddy kit

crush02342002

iTrader: (2)

yeah I remember him...why did he sell?

Bobo06tc

He was gunna get a s2k he is gunna get another kit...im running on ur tune

crush02342002

iTrader: (2)

lol...how you likeing it? is it doing ok for ya?

even though I beleave I do the best tunes in Texas It still needs to be tuned to your car eventually.

Bobo06tc

Love it im gunna fix the manifold crack and change bov and geuss drive 250 miles and have tune it again

Bobo06tc

If ur interested I wanna do a mild build

crush02342002

iTrader: (2)

sure I can do that for ya...let me know when your ready and ill get some prices togather.

Bobo06tc

I know rods pistons springs retainers maybe bigger valves and I would like stage 2 or 3 bc turbo cams

crush02342002

iTrader: (2)

That's not a mild build in my book... Lol
That's not a problem though, I can help ya

Bobo06tc

I wanna make 350-400sure safely