Synapse Engineering BOV Testing Day
#102
If you order the bov with the adaptor plate for the hks, per Prestige is does not comes with the c-ring and o-ring. Can be a problem for some if you want to sell the hks.
Until then, you can buy the c ring/ o ring from http://shop.edoperformance.com
Until then, you can buy the c ring/ o ring from http://shop.edoperformance.com
#103
That is correct. The synapse BOV does not come with a C ring. You will need to keep the existing C ring from your HKS BOV. We do carry HKS C-rings, however they have not been added to the website yet.
#108
I am using ports A and B, I guess I need a anti stall kit , I tried looking at your website but you can not purchase it individually. One other thing does it need to be tap as close as possible to intake manifold vac line, becuase my wastegate actuator is tap already to vac line.
#109
Originally Posted by Rydrdg
I am using ports A and B, I guess I need a anti stall kit , I tried looking at your website but you can not purchase it individually. One other thing does it need to be tap as close as possible to intake manifold vac line, becuase my wastegate actuator is tap already to vac line.
in your case, since the Greddy RS was recirculating, your car would run much better recirculating the BOV. The only reason we didnt' recirc browndogg's tC was because the dezod kit isn't made to do so.
#111
got mine on, havent hooked up the third barb yet, gotta find a fitting for the compressor. still flutter dumps but not as much as the hks. sounds like puff, puff, whooooosh. it's quieter too. i wont be able to do a before dyno just an after, which will be soon.
#114
Senior Member
SoCal tC Club
SL Member
Join Date: Nov 2005
Location: ASU, Arizona & SoCal
Posts: 1,376
Originally Posted by yamaha16bw
Hook up the port 3 to the wastegate line and that fluttler will go away. It make the BOV open insanley fast.
Do you have a pic of your car and bov and wastegate doing this for reference? That would be awesome!
#115
No. The line running to the bottom of your wastegate should be the boost signal line from the compressor of the turbo. "T" that and run that same sidnal to the port 3 and the BOV will work sooooo much better.
#116
Installed mine on my turbonetics kit last night. Seems to work great, no more stalling and most important, no more backfires! Those huge backfires were going to get me pulled over eventually. I would say it's a great improvement for a small investment.
#117
Senior Member
SoCal tC Club
SL Member
Join Date: Nov 2005
Location: ASU, Arizona & SoCal
Posts: 1,376
Originally Posted by yamaha16bw
No. The line running to the bottom of your wastegate should be the boost signal line from the compressor of the turbo. "T" that and run that same sidnal to the port 3 and the BOV will work sooooo much better.
#119
Originally Posted by BrownDogg
Originally Posted by yamaha16bw
No. The line running to the bottom of your wastegate should be the boost signal line from the compressor of the turbo. "T" that and run that same sidnal to the port 3 and the BOV will work sooooo much better.
Its how its made to work. If you check out there youtube videos mine sounds just like the wrx test car.
#120
Originally Posted by yamaha16bw
Originally Posted by BrownDogg
Originally Posted by yamaha16bw
No. The line running to the bottom of your wastegate should be the boost signal line from the compressor of the turbo. "T" that and run that same sidnal to the port 3 and the BOV will work sooooo much better.
Its how its made to work. If you check out there youtube videos mine sounds just like the wrx test car.