TT "SIMPLE" kit updates with picts
01-08-2009, 09:34 PM
#1
Senior Member
SL Member
Thread Starter
Join Date: Nov 2006
Location: Arizona
Posts: 1,480
TT "SIMPLE" kit updates with picts
Well with the new year comes new changes to Turbotoyotas:
First off: The "SIMPLE" kit is staying. I was going to put it on the chopping block but demand has dictated that its going to stay. With a few updates of course.
1st: The standard "SIMPLE" will still be available:
** = updates for 2009
- Log style Manifold T3 Flanged with 38mm wastegate flange
- 2.5" short downpipe (meets will stock or any aftermarket s-pipe)
- T3/T04B Garrett journal bearing turbo (GT28RS or GT2871R only turbo upgrades offered)
- Tial 38mm wastegate with dumptube
-choice of Greddy, HKS or Bosch BOV (depends on how affordable you want the kit too be)
** - 22 x 8 x 3.5 Intercooler with custom end tanks.(standard starting core size on all kits)-
**Intercooler piping set with couplers/clamps (backdoor style) and run like the new 2.1 series piping no more upper pipe to run across engine bay
-Air intake with MAF sensor and Air filter
-all aluminum piping is powdercoated black
-Vacuum block with fittings
**-Pre tapped oil pan with fitting for oil drain
**- 2 12" slimline fans as the removal of the stock fans/shroud is now required.
-oil feed and drain lines
-all installation hardware
$2500.00 + shipping with Greddy or HKS BOV without fuel management
$200.00 less with bosch style bov.
I currently have one of these kits in stock ready to ship. Only options would be coatings on mani, dp and turbine housing. Flanged for HKS BOV. I piping is powdercoated black. I have intakes for both gens of TC avail ready to go.
Now for the upgraded "SIMPLE" kit:
UPDATE:
pict of new manifold with new Tial 38mm wg:
Same as above with these changes as standard:
**- 3" downpipe and s-pipe combo (vband flanged at dp/spipe and end of s-pipe)
Currently only log style kit with 3" dp-spipe as standard parts of the kit.
Garett T3/T04B 57trim .82ar is standard turbo. (any T3 flanged turbo is available as an option)
upgraded "SIMPLE" kit:
$2900.00 + shipping without fuel management.
Regards-
Todd
First off: The "SIMPLE" kit is staying. I was going to put it on the chopping block but demand has dictated that its going to stay. With a few updates of course.
1st: The standard "SIMPLE" will still be available:
** = updates for 2009
- Log style Manifold T3 Flanged with 38mm wastegate flange
- 2.5" short downpipe (meets will stock or any aftermarket s-pipe)
- T3/T04B Garrett journal bearing turbo (GT28RS or GT2871R only turbo upgrades offered)
- Tial 38mm wastegate with dumptube
-choice of Greddy, HKS or Bosch BOV (depends on how affordable you want the kit too be)
** - 22 x 8 x 3.5 Intercooler with custom end tanks.(standard starting core size on all kits)-
**Intercooler piping set with couplers/clamps (backdoor style) and run like the new 2.1 series piping no more upper pipe to run across engine bay
-Air intake with MAF sensor and Air filter
-all aluminum piping is powdercoated black
-Vacuum block with fittings
**-Pre tapped oil pan with fitting for oil drain
**- 2 12" slimline fans as the removal of the stock fans/shroud is now required.
-oil feed and drain lines
-all installation hardware
$2500.00 + shipping with Greddy or HKS BOV without fuel management
$200.00 less with bosch style bov.
I currently have one of these kits in stock ready to ship. Only options would be coatings on mani, dp and turbine housing. Flanged for HKS BOV. I piping is powdercoated black. I have intakes for both gens of TC avail ready to go.
Now for the upgraded "SIMPLE" kit:
UPDATE:
pict of new manifold with new Tial 38mm wg:
Same as above with these changes as standard:
**- 3" downpipe and s-pipe combo (vband flanged at dp/spipe and end of s-pipe)
Currently only log style kit with 3" dp-spipe as standard parts of the kit.
Garett T3/T04B 57trim .82ar is standard turbo. (any T3 flanged turbo is available as an option)
upgraded "SIMPLE" kit:
$2900.00 + shipping without fuel management.
Regards-
Todd
01-19-2009, 09:16 PM
#12
Senior Member
SL Member
Thread Starter
Join Date: Nov 2006
Location: Arizona
Posts: 1,480
u got any pictures yet?
at least of the new manifold with the 3" dp. I have my mock up stuff , but at this point I am taking my time and will post pictures of the completed parts here shortly.
Once complete I will be offering 2 kits:
1- with a standard bushing T3/T4
2- with a GT2871R
at a discounted price to 2 customers who wish to be outside test subjects.
There will be some work involved so please only "serious" inquiries please.
Drop me an email : Todd@whyindustries.com or an PM if your interested.
Regards-
Todd
02-04-2009, 03:31 PM
#13
Senior Member
SL Member
Thread Starter
Join Date: Nov 2006
Location: Arizona
Posts: 1,480
I have one "SIMPLE" kit in stock ready to go.
Intercooler piping is powdercoated black and flanged for a HKS BOV.
Manifold, downpipe, and turbine housing coatings have not been done and the choice of the color is up to the customer.
Flat black, Flat Gray (battlship gray) or Polished (like pictured)
Complete kit is $2500.00 + shipping
Complete kit with fuel management is $3400.00 + shipping
http://www.whyindustries.com/store/p...roducts_id=124
Kit includes:
-Log style Manifold T3 Flanged with 38mm wastegate flange
- 2.5" short downpipe (meets with stock or any aftermarket s-pipe)
- T3/T04B Garrett journal bearing turbo
- Tial 38mm wastegate with dumptube
- HKS BOV
- 22 x 8 x 3.5 Intercooler with custom end tanks.(standard starting core size on all kits)-
-Intercooler piping set with couplers/clamps (backdoor style) and run like the new 2.1 series piping no more upper pipe to run across engine bay
-Air intake with MAF sensor and Air filter
-all aluminum piping is powdercoated black
-Vacuum block with fittings
-Pre tapped oil pan with fitting for oil drain
- 2 12" slimline fans as the removal of the stock fans/shroud is now required.
-oil feed and drain lines
-all installation hardware
Regards-
Todd
Intercooler piping is powdercoated black and flanged for a HKS BOV.
Manifold, downpipe, and turbine housing coatings have not been done and the choice of the color is up to the customer.
Flat black, Flat Gray (battlship gray) or Polished (like pictured)
Complete kit is $2500.00 + shipping
Complete kit with fuel management is $3400.00 + shipping
http://www.whyindustries.com/store/p...roducts_id=124
Kit includes:
-Log style Manifold T3 Flanged with 38mm wastegate flange
- 2.5" short downpipe (meets with stock or any aftermarket s-pipe)
- T3/T04B Garrett journal bearing turbo
- Tial 38mm wastegate with dumptube
- HKS BOV
- 22 x 8 x 3.5 Intercooler with custom end tanks.(standard starting core size on all kits)-
-Intercooler piping set with couplers/clamps (backdoor style) and run like the new 2.1 series piping no more upper pipe to run across engine bay
-Air intake with MAF sensor and Air filter
-all aluminum piping is powdercoated black
-Vacuum block with fittings
-Pre tapped oil pan with fitting for oil drain
- 2 12" slimline fans as the removal of the stock fans/shroud is now required.
-oil feed and drain lines
-all installation hardware
Regards-
Todd
03-21-2009, 05:21 AM
#20
Senior Member
SL Member
Thread Starter
Join Date: Nov 2006
Location: Arizona
Posts: 1,480
so does the new Simple kit have all the cool TT badges? i thinks its a nice touch to an already awesome kit!
And it comes standard with the new Tial 38mm vband style wastegate.
Regards-
Todd