turbo kit partout update PG 2
03-06-2009, 05:58 PM
#1
Senior Member
SL Member
Thread Starter
Join Date: Jul 2006
Location: Miami, FL
Posts: 916
turbo kit partout update PG 2
I simply don’t have the time and money to build my motor now, so im gona be selling my car locally, and the kit here, this is my baby im selling, I took alota time and money in building this custom turbo setup. I need the money now to put down on a new car, that’s what I need and having been parked for over a month now has really begun to bother all my friends and family lol seeing as im always asking for a ride I need a reliable DD. Rather than getting rid of the kit w/ the car id rather sell it to someone here so it can be used properly. Im gona be putting it up in the classifieds in a couple days I just havnt finished taking everything out, when its all removed ill put it up, just don’t want someone sending me money and its still half in my car. Ill post pics up now of what im offering.
I’m trying to sell it as a hole, not resorting to parting it out yet.
Asking $2500 shipped to non local
Asking $2000 local.
To have the downpipe fit flush you may need to adjust the ac line.
To have the 3’’ Intake fit flush you will need to shift the battery closer to the radiator (minor shift)
MAF flange is for 05-06 if your 06-09 you’d need to change the flange & Harness
1. Garrett 60-1 Turbocharger .70 a/r .63trim Stage 3 exhaust wheel. Great condition (more than capable of making 550whp)
2. Dezod Intercooler Pipes
3. Dezod Front Mount Intercooler
4. Custom 3’’ Intake
5. Treadstone Cast Iron Manifold
6. 38mm Turbonetics evolution wastegate (comes w/ shillings and springs)
7. Murray Speed and Custom Vacuum block
8. AEM FIC w/ updated main and slave chip. (comes w/ 10-11 psi tune)
9. Boomslang Harness with resistors (soldered)
10. 550cc Injectors from Dezod/deatschewerks & OEM Fuel Rail.
11. Turbo Downpipe (2.5’’ off the turbo first initial bend than tapers to 3’’) & 3’’ S-Pipe (extra sensors)
12. Pre tapped Oil Pan
13. Oil Feed & Drain Lines
14. Walbro 255lph Fuel Pump & Fuel Pump Housing (for direct bolt on no need for anyone to cut anything)
15. HKS SSQV ( I can throw in my recirc fitting and recirc hose I never installed)
16. Atmospheric dump tube for wastegate
17. Comes with all nuts, bolts, gaskets, couplers, clamps
18. Extra vacuum lines and t-fittings.
Id recommend a boost gauge, a wideband, and a good tune, the tune I have in the FIC is good, but a custom tune for your car will be best.
Here are some pictures of the turbo it installed on my car
Here are some of the parts out of the car
I’m trying to sell it as a hole, not resorting to parting it out yet.
Asking $2500 shipped to non local
Asking $2000 local.
To have the downpipe fit flush you may need to adjust the ac line.
To have the 3’’ Intake fit flush you will need to shift the battery closer to the radiator (minor shift)
MAF flange is for 05-06 if your 06-09 you’d need to change the flange & Harness
1. Garrett 60-1 Turbocharger .70 a/r .63trim Stage 3 exhaust wheel. Great condition (more than capable of making 550whp)
2. Dezod Intercooler Pipes
3. Dezod Front Mount Intercooler
4. Custom 3’’ Intake
5. Treadstone Cast Iron Manifold
6. 38mm Turbonetics evolution wastegate (comes w/ shillings and springs)
7. Murray Speed and Custom Vacuum block
8. AEM FIC w/ updated main and slave chip. (comes w/ 10-11 psi tune)
9. Boomslang Harness with resistors (soldered)
10. 550cc Injectors from Dezod/deatschewerks & OEM Fuel Rail.
11. Turbo Downpipe (2.5’’ off the turbo first initial bend than tapers to 3’’) & 3’’ S-Pipe (extra sensors)
12. Pre tapped Oil Pan
13. Oil Feed & Drain Lines
14. Walbro 255lph Fuel Pump & Fuel Pump Housing (for direct bolt on no need for anyone to cut anything)
15. HKS SSQV ( I can throw in my recirc fitting and recirc hose I never installed)
16. Atmospheric dump tube for wastegate
17. Comes with all nuts, bolts, gaskets, couplers, clamps
18. Extra vacuum lines and t-fittings.
Id recommend a boost gauge, a wideband, and a good tune, the tune I have in the FIC is good, but a custom tune for your car will be best.
Here are some pictures of the turbo it installed on my car
Here are some of the parts out of the car
03-06-2009, 07:01 PM
#5
Senior Member
SL Member
Join Date: Oct 2008
Posts: 743
Everyone is getting rid of their tC's now. My motor blew and it's going to take a lot of money to do what I want to do. So i'm getting an 07 Si off of erepairables.com and that will be my next best project. NA Civic Si 
Goodluck with your car and your sale and sorry to hear about everything!
Goodluck with your car and your sale and sorry to hear about everything!
03-06-2009, 07:29 PM
#8
Senior Member
SL Member
Thread Starter
Join Date: Jul 2006
Location: Miami, FL
Posts: 916
Originally Posted by HEYitzMEEE
Yeah for brand new they aren't that expensive. I'm just not a fan of the smaller size and the boomerang lights and tails 
i like the tails, but the headlights will have to grow on me, i just love that HR motor.
03-06-2009, 07:36 PM
#9
Senior Member
SL Member
Join Date: Oct 2008
Posts: 743
Yeah, I like how it's not the VQ anymore. It's time to move onto bigger and better things I suppose. I barely turned 19 not too long ago so an Si is good for me. Plus I can't afford a car like that haha.
Can't wait to see it though, hope you get what you want!
I barely turned 19 not too long ago so an Si is good for me. Plus I can't afford a car like that haha. Can't wait to see it though, hope you get what you want!
03-06-2009, 07:47 PM
#13
Senior Member
SL Member
Thread Starter
Join Date: Jul 2006
Location: Miami, FL
Posts: 916
Originally Posted by HEYitzMEEE
LOL seriously. Post here in the FI. It'll have FI power with bolt ons compared to scions lol.
I still love Scion, but need to move on lol. I'm going to miss my 200 pound glass roof.
I still love Scion, but need to move on lol. I'm going to miss my 200 pound glass roof.
For sure ill miss my tC w/ the FMIC sticking out the bumper, driving behind g35's and 350z's wont be the same! but itll be just as good w/ a 370z if not better, im sick of FWD...RWD is where its at.
