turbonetics CEL came on, scanned code...
#21
Originally Posted by zer0
#22
Originally Posted by MIAPLAYA
Originally Posted by zer0
Our Defi gauges read in BAR for Boost as well as for Vaccum
#27
Originally Posted by rhythmnsmoke
^^Oh, my bad, I thought it was in Bar there too. Numbers all look the freakin same. Oh well, when I'm driving, I'm on the OTHER SIDE of the 0 anyway....
#28
just took a drive to the store, and took notice of the boost gauge. When I'm cruising in vac, and I let off the gas and allow the car to coast while in gear still, it would read 0.8. Now, if I'm stopped at the light, and at rest, it will read right in between 0.6 and 0.8.
#29
Originally Posted by zer0
I checked for boost leaks, jacked the car up and retightened everything. vacuum hoses are where they're supposed to be. I even took out both O2 sensors to check, theyre both covered with carbon, so i wiped them down, put it back on. Now, when i drove the car home for about 15 min. of driving, CEL didnt come on. I noticed the RPM jumps up and down (700-1000 RPM), but when engine is hot its steady at 700. Car still backfires even when CEL is not on. Ill drive longer tomorrow, see what happens.
Thread
Thread Starter
Forum
Replies
Last Post
steeze69
Scion tC 1G Drivetrain & Power
1
05-24-2021 02:57 AM
SloTC1
PPC: Engine / Drivetrain
14
08-16-2018 02:45 PM
xb4lf
Scion xB 1st-Gen Owners Lounge
0
04-04-2015 07:15 PM