Walbro 255 LPH Fuel Pump
#21
Senior Member
Team No Limitz
SL Member
Team ScioNRG
Join Date: May 2004
Location: Smithtown Scion (NY)
Posts: 3,789
Originally Posted by Simplyscion
Originally Posted by deathbyc4
i want to see a diagram of how it was ran. inline after the stock pump or removed the stock, etc.
#23
Re: Walbro 255 LPH Fuel Pump
Originally Posted by 318_tC
This should work just fine for the tC shouldnt it?
#24
Re: Walbro 255 LPH Fuel Pump
Originally Posted by 318_tC
This should work just fine for the tC shouldnt it?
#26
Originally Posted by ERIC-TC
Anyone have info on how to raise the stock fuel pressure on the tC? Could in-line pumps be used? What about modifing the pressure regulator on the stock fuel-rail-line? Any pics of installs?
#28
problems with something
I just installed one in my TC have the Turbonetics kit. Had to modify a bracket on the bottom to hold the pump in and get a new plug (the Tc is too narrow) but now my car falls on its face a 3k-3500 and will not boost up. My A/F is 17-18 at idle too...anyone
#29
Did you modify your fuel rail with a fitting for the return-line? You will also need to remove the pulse-damper off the fuel rail and replace with a fuel pressure regulator. Hell might as well install one of those small fuel-pressure gauge at the rail as well.
#30
Re: Walbro 255 LPH Fuel Pump
Originally Posted by Rasta
Originally Posted by 318_tC
This should work just fine for the tC shouldnt it?
and the 1/4" ball bearing is incase I upgrade to an aeromotive fpr???
Thread
Thread Starter
Forum
Replies
Last Post
steeze69
Scion tC 1G Drivetrain & Power
1
05-24-2021 02:57 AM