Scott8

iTrader: (1)

Are you running a catch tank or fabbing somehting up for the breather?



Pictures of your set up will be greatly appreciated

Scott

zer0

The intake pipe to the turbo will have a connection for that hose. Most kits should.

Scott8

iTrader: (1)

I didn't see one...I will have to look again when I get home. I hope it has one on my kit.

Was it the intake section that runs into the turbo, or the intake that goes into the throttle body?

zer0

What kit?

Scott8

iTrader: (1)

zpi

krdshrk

It should have the hookup for that. Mine's to the left of my red battery terminal.

rozz-tC

mine didnt i just ran a breather filter

zer0

I guess the ZPI kit doesnt have one. I looked at the customer cars on their website and didnt see one. hmm

Scott8

iTrader: (1)

I just checked the pipes and I don't see one...

Rozz-tc where'd you get the breather filter?

rozz-tC

autozone lol, its like 5 bucks or something, i used the OEM rubber hose and the clamps on it and just pushed in the filter, clamped it down. no problems thus far and ive been boosted for over 5k miles

Scott8

iTrader: (1)

i wonder how much it will be to have a shop weld on a port to attach the breather to the intake?

krdshrk

I've seen those breather filters at Pep Boys.

Don't need to weld it. You can attach it with a clamp. It should come with it.

Simplyscion

definitely put a breather on it cause if not your engine bay is gonna be gross after a while

hPower

^^ What he said

pollup

plus it will make your intake filter dirty fast. im going to be setting up a catch can, just gotta find a spot. i run the zpi kit as well. breather only works so well.

Whocares05050

Why would you want to route hot gases and oil back into the car? emissions? thats just rediculous.

I have a ZPI kit, and i have hose runing from the vent dumping straight to the ground.

The filter will be dirty after about 3-4 weeks. catch cans ar goos as well.