highvoltage1

iTrader: (11)

how well does the stage 0 hold up in high temp states such as fl, nv, az, tx, etc., without having an intercooler i am gonna get one im in wa now so no probs with heat really but i may be transfering back to fl and dont want to cut my front bumper support for an upgrade or is there an intercooler from zpi that u dont have to do cut nething just for a lil cooling and better piece of mind

rhythmnsmoke

^^I wouldn't be able to answer that question, as it has not warmed up fully here yet. It's reaching 90 degrees recently. That's about the highest thus far. When we get well into the Summer, we see about 101 give or take a few.

Dyltone

Any intercooler will do... I believe ZPI is the only one that requires modification to your bumper support. So you could get the intercooler and brackets from Dezod since you'll have to get custom IC piping anyway.

highvoltage1

iTrader: (11)

cool thanks and travis let me know when the temps get hotter how it does thanks

rhythmnsmoke

^^No problem. Just look to this thread:

https://www.scionlife.com/forums/vie...4516&start=120

As it's the one I update about Louis' Stage 0 when it comes to any new mods and performance specifications he does.

highvoltage1

iTrader: (11)

cool will do

bcnu_702

Well being here in Las Vegas, I've had the stage 0 kit on for about 1 1/2 weeks now, and it feels fine. I don't run it hard in the day b/c I don't have an intercooler yet or a tune, so I stay in vacuum most of the day, but at night (gets down to about 85-90, it feels great!

Mr_Meaty

bcnu,
can you post up a pic of your gauges? I'd like to see how you have them set up.

bcnu_702

I'll take a picture of them for you tonight and post em up for you.

olaHalo

lol. stole my job

Dyltone

bcnu_702

Ok here is a pic of my gauge setup. It is just a typical A-pillar, top gauge is EGT, bottom is BOOST, and the center one will be my afr's late this week. Also, turbo timer will be sitting on top of the steering wheel. My camera phone sux, this is the best I got. Thanks

rhythmnsmoke

^^what gauges are you running again? LED light change on the dash?

bcnu_702

No led change on the dash yet, although my camera did make it look red LOL. It's still stock. As for the gauges, I have EGT, BOOST, and will be getting the WIDEBAND this week.

rhythmnsmoke

Yeah...lol. It does look like an LED upgrade. I was asking about the gauges in the form of what Brand gauges you were running?

bcnu_702

Ah my bad. They are glowshift gauges...

www.glowshift.com

I got the 7-LED ones which allow you to change the led backlight color. Also, they are tinted so when they're off, it just looks black.

olaHalo

Hey wheres the blue tape?

Mr_Meaty

Thanks.
Your getting the AEM Wideband, right?
I think I'm going all AEM for boost, wideband and oil pressure. a little pricey but good quality and accuracy. I was considering the glowshift until I saw all the typos on their website! Made me sketch, but yours are working good, eh?
deathbyc4 pointed me to the AIT ePod that he's using.

It's twice as expensive as the piller pod, but I like the way it mimics the tC speedo gauge shape. Plus, it's in the middle where I want them. I'm sure I'll end up with a piller pod when I want to monitor temps, but that's after some fuel management.

Hey rhythmnsmoke, what gauges are you running? brand and type? And that box in yoru cubby, is that a boost controller?

olaHalo

^^^dude that looks VERY NICE!!

or as Glowshift would say, "VREY NIEC!!"



what website is that from?

Mr_Meaty

http://autotechinteriors.com
Yeah, I dont' know if i'm going with that or see if garage1217 can come up with something nice under the stereo.
But the more I look at it, the more I like it.[/url]