ZPI Stage 0 install **Pics 5/9** 56k get some robertos!
#121
how well does the stage 0 hold up in high temp states such as fl, nv, az, tx, etc., without having an intercooler i am gonna get one im in wa now so no probs with heat really but i may be transfering back to fl and dont want to cut my front bumper support for an upgrade or is there an intercooler from zpi that u dont have to do cut nething just for a lil cooling and better piece of mind
#122
^^I wouldn't be able to answer that question, as it has not warmed up fully here yet. It's reaching 90 degrees recently. That's about the highest thus far. When we get well into the Summer, we see about 101 give or take a few.
#123
Any intercooler will do... I believe ZPI is the only one that requires modification to your bumper support. So you could get the intercooler and brackets from Dezod since you'll have to get custom IC piping anyway.
#125
^^No problem. Just look to this thread:
https://www.scionlife.com/forums/vie...4516&start=120
As it's the one I update about Louis' Stage 0 when it comes to any new mods and performance specifications he does.
https://www.scionlife.com/forums/vie...4516&start=120
As it's the one I update about Louis' Stage 0 when it comes to any new mods and performance specifications he does.
#127
Originally Posted by highvoltage1
how well does the stage 0 hold up in high temp states such as fl, nv, az, tx, etc., without having an intercooler i am gonna get one im in wa now so no probs with heat really but i may be transfering back to fl and dont want to cut my front bumper support for an upgrade or is there an intercooler from zpi that u dont have to do cut nething just for a lil cooling and better piece of mind
#129
Originally Posted by Mr_Meaty
bcnu,
can you post up a pic of your gauges? I'd like to see how you have them set up.
can you post up a pic of your gauges? I'd like to see how you have them set up.
#131
Originally Posted by bcnu_702
Originally Posted by Mr_Meaty
bcnu,
can you post up a pic of your gauges? I'd like to see how you have them set up.
can you post up a pic of your gauges? I'd like to see how you have them set up.
#132
Ok here is a pic of my gauge setup. It is just a typical A-pillar, top gauge is EGT, bottom is BOOST, and the center one will be my afr's late this week. Also, turbo timer will be sitting on top of the steering wheel. My camera phone sux, this is the best I got. Thanks
#134
Originally Posted by rhythmnsmoke
^^what gauges are you running again? LED light change on the dash?
#135
Originally Posted by bcnu_702
Originally Posted by rhythmnsmoke
^^what gauges are you running again? LED light change on the dash?
Yeah...lol. It does look like an LED upgrade. I was asking about the gauges in the form of what Brand gauges you were running?
#136
Originally Posted by rhythmnsmoke
Originally Posted by bcnu_702
Originally Posted by rhythmnsmoke
^^what gauges are you running again? LED light change on the dash?
Yeah...lol. It does look like an LED upgrade. I was asking about the gauges in the form of what Brand gauges you were running?
www.glowshift.com
I got the 7-LED ones which allow you to change the led backlight color. Also, they are tinted so when they're off, it just looks black.
#137
Originally Posted by bcnu_702
Ok here is a pic of my gauge setup. It is just a typical A-pillar, top gauge is EGT, bottom is BOOST, and the center one will be my afr's late this week. Also, turbo timer will be sitting on top of the steering wheel. My camera phone sux, this is the best I got. Thanks
#138
Thanks.
Your getting the AEM Wideband, right?
I think I'm going all AEM for boost, wideband and oil pressure. a little pricey but good quality and accuracy. I was considering the glowshift until I saw all the typos on their website! Made me sketch, but yours are working good, eh?
deathbyc4 pointed me to the AIT ePod that he's using.
It's twice as expensive as the piller pod, but I like the way it mimics the tC speedo gauge shape. Plus, it's in the middle where I want them. I'm sure I'll end up with a piller pod when I want to monitor temps, but that's after some fuel management.
Hey rhythmnsmoke, what gauges are you running? brand and type? And that box in yoru cubby, is that a boost controller?
Your getting the AEM Wideband, right?
I think I'm going all AEM for boost, wideband and oil pressure. a little pricey but good quality and accuracy. I was considering the glowshift until I saw all the typos on their website! Made me sketch, but yours are working good, eh?
deathbyc4 pointed me to the AIT ePod that he's using.
It's twice as expensive as the piller pod, but I like the way it mimics the tC speedo gauge shape. Plus, it's in the middle where I want them. I'm sure I'll end up with a piller pod when I want to monitor temps, but that's after some fuel management.
Hey rhythmnsmoke, what gauges are you running? brand and type? And that box in yoru cubby, is that a boost controller?
#140
http://autotechinteriors.com
Yeah, I dont' know if i'm going with that or see if garage1217 can come up with something nice under the stereo.
But the more I look at it, the more I like it.[/url]
Yeah, I dont' know if i'm going with that or see if garage1217 can come up with something nice under the stereo.
But the more I look at it, the more I like it.[/url]