DIY:"lighter" coolant(PICS)
#21
Member
SL Member
Scion Evolution
Thread Starter
Join Date: Dec 2006
Location: South Side, Chicago
Posts: 57
LEAKAGE?-the holes i drilled made an extremely tight fit... so i didnt even think i needed to seal them... i have actually had this mod for about three weeks now and there is absolutely no leakage! i think it is because the coolant never goes in that tank hot enough to melt... not that i know how hot it goes in or anything... but i have had no problem and i dont drive like a grandma...
-thanks again everyone i knew it would be a good idea since i first thought of it...
-thanks again everyone i knew it would be a good idea since i first thought of it...
#27
Originally Posted by mar10
i actually might also do my power steering tank and my brake tank... ill post pics
As for the one in the coolant overflow, it looks good. Did you remember to put a fuse on it? I understand it's not leaking now, but over time the glue will degrade. and fluid+electricity= no good.
#29
You sure that is really under pressure? The lids are never on very tight, and if there was any pressure, I'd assume the lids would just pop off.
Still I'd be worried about drilling a hole in there, You could probably get a similar effect just putting the LED outside the plastic
Looks sweet though!
Still I'd be worried about drilling a hole in there, You could probably get a similar effect just putting the LED outside the plastic
Looks sweet though!
#30
did you use an LED holder? Like is the LED just in the hole and thats it or what. I dont get that part.
If i dont do this mod, I will atleast get clear hose, that is so bad ___ and original, i would never think of that.
If i dont do this mod, I will atleast get clear hose, that is so bad ___ and original, i would never think of that.
#31
Originally Posted by Skribbez
Originally Posted by mar10
i actually might also do my power steering tank and my brake tank... ill post pics
As for the one in the coolant overflow, it looks good. Did you remember to put a fuse on it? I understand it's not leaking now, but over time the glue will degrade. and fluid+electricity= no good.
The tank is NOT under pressure.
Only the radiator.
#39
Originally Posted by SciontCya
That's hot for checking the fluid in the dark!
_________________
If your sig is longer than your post, delete it!
1 Love Now! Stop the hatin'
_________________
If your sig is longer than your post, delete it!
1 Love Now! Stop the hatin'
lol just messin
more to the point: bump; make this a tech
#40
Originally Posted by x_Batman_x
Originally Posted by SciontCya
That's hot for checking the fluid in the dark!
_________________
If your sig is longer than your post, delete it!
1 Love Now! Stop the hatin'
_________________
If your sig is longer than your post, delete it!
1 Love Now! Stop the hatin'
lol just messin
more to the point: bump; make this a tech