I just ordered some CDT Es comps and didnt think to look at the depth of em

anywhoo the spec sheet says 2.75" witch is 2-7/8"

I got some speaker adaptors made at work but all we have is 1/2"
I read up and saw that 3/4" is a little better but thats only 1/4 inch


anywho has anyone had problems with mounting depth or know roughly what the mounting depth is?

thanks

 

Uh... isn't 2.75 the same as 2-3/4 ???

 

That's ok, because if they don't give you adequate depth, you can double-up on them and make a 1" spacer.

And yes, 2.75" = 2-3/4", NOT 2-7/8"

 

blah blah blah lol

so whats the max depth?

anyone try a set and NOT have enough room?

 

i have the rsd's in my doors. they are 2.87 inches deep. i used a 3/4 piece of mdf behind it.

 

my infinity kappa 6.1 are 2-3/4" deep. they fit fine with 3/4" thick bracket

 

thanks

thanks to the guy who posted below you also

 

no problem dude!

 

usually crutchfield will tell you the specs of your sound system (head unit size, speaker size; depth, and other specs

 

i looked but saw no max depth,just what will fit in terms of diameter

 

they have an option to chat with a rep. do that and ask them, they should know