Official racing seat thread! post 'em up!
#301
Senior Member
Trader
SL Member
iTrader: (16)
Join Date: Dec 2007
Location: LOWLOW Chicago
Posts: 13,746
has anyone ever installed seats, then taken them back out and put the OEM seats back in?
I sold my sparcos, put the OEM seats back in and hooked everything up but i cant get my airbag light to turn off...
I sold my sparcos, put the OEM seats back in and hooked everything up but i cant get my airbag light to turn off...
#304
I did that and everything is fine. Are you sure you reconnected everything? I'm not sure what year tC you have... but I had the pressure sensor for the passenger seat and then the little seat position sensor on the driver's seat (attaches to the outside rail).
As long as everything is connected, it should be fine. I didn't have to reset the ECU or anything.
As long as everything is connected, it should be fine. I didn't have to reset the ECU or anything.
#305
Senior Member
Trader
SL Member
iTrader: (16)
Join Date: Dec 2007
Location: LOWLOW Chicago
Posts: 13,746
ugh, this ____ing sucks.
ive double checked everything and its all plugged in.
pass seat weight sensor thing still works and everything.
i also had an aftermarket steering wheel installed but i checked that too and its all connected.
guess ill have to keep checking, wish there was some way to run a diagnostics scanner on it like an OBDII scanner.
ive double checked everything and its all plugged in.
pass seat weight sensor thing still works and everything.
i also had an aftermarket steering wheel installed but i checked that too and its all connected.
guess ill have to keep checking, wish there was some way to run a diagnostics scanner on it like an OBDII scanner.
#307
ugh, this ____ing sucks.
ive double checked everything and its all plugged in.
pass seat weight sensor thing still works and everything.
i also had an aftermarket steering wheel installed but i checked that too and its all connected.
guess ill have to keep checking, wish there was some way to run a diagnostics scanner on it like an OBDII scanner.
ive double checked everything and its all plugged in.
pass seat weight sensor thing still works and everything.
i also had an aftermarket steering wheel installed but i checked that too and its all connected.
guess ill have to keep checking, wish there was some way to run a diagnostics scanner on it like an OBDII scanner.
#309
you may have damaged the spiral assembly when putting the stock wheel back on, same thing happened to me, i put the stock wheel and seats on at the same time and the airbag light is still on... you can check the air bag system through OBD2 port but you need a special scanner, not one of the cheap ones you get from autozone or something... i use the one that toyota uses that can check everything, even if cruise control is working.
#310
Senior Member
Trader
SL Member
iTrader: (16)
Join Date: Dec 2007
Location: LOWLOW Chicago
Posts: 13,746
you may have damaged the spiral assembly when putting the stock wheel back on, same thing happened to me, i put the stock wheel and seats on at the same time and the airbag light is still on... you can check the air bag system through OBD2 port but you need a special scanner, not one of the cheap ones you get from autozone or something... i use the one that toyota uses that can check everything, even if cruise control is working.
#312
the spiral assembly is what hooks the airbag up to the harness. along with cruise, the audio controls and the horn. ie. i screwed up my spiral assembly but my audio controls still work but cruise, horn and airbags dont.
you dont have a friend thats a tech or sales person at a dealership? if so ask him to use techstream, its a laptop that hooks up to your OBDII connector.
you dont have a friend thats a tech or sales person at a dealership? if so ask him to use techstream, its a laptop that hooks up to your OBDII connector.
#313
Senior Member
Trader
SL Member
iTrader: (16)
Join Date: Dec 2007
Location: LOWLOW Chicago
Posts: 13,746
the spiral assembly is what hooks the airbag up to the harness. along with cruise, the audio controls and the horn. ie. i screwed up my spiral assembly but my audio controls still work but cruise, horn and airbags dont.
you dont have a friend thats a tech or sales person at a dealership? if so ask him to use techstream, its a laptop that hooks up to your OBDII connector.
you dont have a friend thats a tech or sales person at a dealership? if so ask him to use techstream, its a laptop that hooks up to your OBDII connector.
where can i get a new spiral assy without being charged up the assy?
also, how do i go about not messing it up again when i install it?
#319