Flint Mica Cult
12-02-2010 | 02:46 AM
Junior Member
Joined: Oct 2010
Posts: 20
look at the picture man. you can tell the difference clearly. thats the shadow on the tire from almost tucking i have 1/4 to 1/2 finger gap on the fronts.
and if dropping your car on springs made your car drive funny then somethigs wrong. my ____s been dropped for awhile now and have YET to get an alignment with no problems.
tech or not you shoulda known to let the springs settle before aligning. hell even the manufacturers for suspension parts tell you to let it settle before an alignment, smh. noob trying to teach a thing or two about a thing or two
and if dropping your car on springs made your car drive funny then somethigs wrong. my ____s been dropped for awhile now and have YET to get an alignment with no problems.
tech or not you shoulda known to let the springs settle before aligning. hell even the manufacturers for suspension parts tell you to let it settle before an alignment, smh. noob trying to teach a thing or two about a thing or two
My cars alignment was already a tad off before I lowered. Just got new tires ect.. After putting the springs on it was about .8 degrees off from where spec is. Not a huge difference but from someone who knows "a thing or two about a thing or two" it's noticeable.
If you honestly think that your alignment isn't off after lowering your car about 2 INCHES then I would almost offer to pay your alignment fee after taking your car to a certified dealer and getting it put on an alignment rack and seeing the before printout to prove you wrong.
But hey man, you're just another E-warrior looking to flex your E-***** at kids on here trying to join the "cool club." I could care less.
Take those stickers off your car, lose all of that "carbon fiber" and grow the ____ up.
Take care.
12-02-2010 | 03:14 AM
LULZZZZZ
e-warrior, e-*****. LOL had to go there since you didnt wanna look like a typical mechanic that doesnt know jack ____. failure alone in getting an alignment before the springs were even settled. LIKE I SAID no alignment here and my tires are great car drives straight and no vibrations, etc.
AND AGAIN if you knew ANYTHING youd know that tein stechs were slightly altered compared to the earlier production models. so are you saying that the oter 10 people and myself on this thread are blind? get with it boy, take it like a man and move on, yea your wrong end of story
i see you following my foot steps soon enough, your gonna wish your car looked like that dude FlintMica2005 get to my level then come talk to me about modding a car. ok MASTER TECH?
e-warrior, e-*****. LOL had to go there since you didnt wanna look like a typical mechanic that doesnt know jack ____. failure alone in getting an alignment before the springs were even settled. LIKE I SAID no alignment here and my tires are great car drives straight and no vibrations, etc.
AND AGAIN if you knew ANYTHING youd know that tein stechs were slightly altered compared to the earlier production models. so are you saying that the oter 10 people and myself on this thread are blind? get with it boy, take it like a man and move on, yea your wrong end of story
i see you following my foot steps soon enough, your gonna wish your car looked like that dude FlintMica2005 get to my level then come talk to me about modding a car. ok MASTER TECH?
12-02-2010 | 03:49 AM
Junior Member
Joined: Oct 2010
Posts: 20
I've had my car on the rack since the "settling" of the springs, which may have been around 1-3 mm in difference, and it did not change the specs more than 1/10 of a degree out at most. Even then, that's probably from the tire wear alone.
Show me where tein has changed their production models on the S-techs, on their website, where it has effected the ride height of the springs.
I've yet to see you break out that tape measure on that less than desirable car that you posses.
Who'd you pay to put your springs on anyways?
Show me where tein has changed their production models on the S-techs, on their website, where it has effected the ride height of the springs.
I've yet to see you break out that tape measure on that less than desirable car that you posses.
Who'd you pay to put your springs on anyways?
12-03-2010 | 02:53 AM
Senior Member
Scikotics
SL Member
Joined: Nov 2006
Posts: 2,208
From: Poser City, Texas
12-06-2010 | 06:35 PM
Senior Member
Scikotics
SL Member
Joined: Nov 2006
Posts: 2,208
From: Poser City, Texas
OMFG!!!!!!! DAMN YOU BIRDS!!!!!! ITS DECEMBER!!!! YOUR SUPPOSE TO BE IN THE SOUTH DAMNIT!!!!!....they just s*** all over my baby after wash, clay bar and wax was done. son of a.......
12-06-2010 | 10:41 PM
Senior Member
SL Member
Joined: Nov 2005
Posts: 3,410
From: Bellevue, WA
