itzallgood707

What did you do different? I ordered one and I'm expecting it this week.

Sent from my Nexus 7 using Tapatalk HD

bcp06tc

The reason why you need to drill underneath on the driver side is because the bolt is too big and not the correct thread pattern. What I did is just went to the hardware store and got a size smaller bolt and a new nut that would fit through the hole and used that. I dunno why the kit wasn't designed like that in the first place. If you want some pictures I can get some tomorrow of what I'm talking about.

itzallgood707

That would be extremely helpful. What size bolt and washer did you use?

Sent from my SGH-T989 using Tapatalk 2

bcp06tc

I don't recall what size it was, i just brought the bolts that came with the strut bar to the hardware store and made compared sizes it really only needs to be like two sizes smaller. It also helps if you get longer bolts. I used the bolt that came with the strut bar on the passenger side because there is no drilling on the bottom required, and it was barely long enough for me to thread the nut on. So id say for the driver side, get two sizes smaller and longer bolt, nut and washer. For the passenger side you might as well get a longer bolt as well, it will make it easier for you. I'll get pics of what im talking about after i get off work at 5.

bcp06tc

Bottom drivers side with different but and bolt


Top drivers side with different bolt


Passenger side with bold that came with it

itzallgood707

Cool. Thank you for the pics and explanation. Is the bolt you used smaller around in diameter than the one that came with the kit?

Sent from my SGH-T989 using Tapatalk 2

bcp06tc

Yup, and a bit longer. I think I'm going to take it out and put another, bigger washer under the smaller washer on the top cuz the washer I used is kind of small. But other than that everything holds great.

itzallgood707

I can see what you're talking about. I don't know why they didn't design it the way you put it in. I'm really hesitant about drilling into my car. Thank you again.

Sent from my SGH-T989 using Tapatalk 2

itzallgood707

I installed my ingalls rear strut bar today. Thank you for the advice on using smaller bolts. I used 3/8 at 6" long on driver side and 5/16 at 6" long on passenger side.

Sent from my Nexus 7 using Tapatalk HD

Sleeper_TC

pretty cool post!!! wish i can find a deal for a carbon fiber hood like that over here...
we don't got anything like that at all and when you do its gone before you know it...

dont really see much BCP Tc's that make post either!!! thinking bout making one for mine lol

bcp06tc

No problem, happy it worked out for you

bcp06tc

You should, I think they're one of the best colors

Sleeper_TC

i cant seem to find all of my old pics of when i first got my car lol

bcp06tc

Well, I'm going to be selling my entire exhaust including header because I'm re doing it for the turbo setup. I price things to sell so you may be in luck