Show me hot White tC's
07-15-2010, 12:51 AM
#7782
Senior Member
SL Member
Join Date: Jun 2007
Location: Chino Hills, CA
Posts: 657
awesome response, thanks.
it would have taken you less than a minute to describe the difference between the two. for those who want an answer instead of a condescending response, here is a picture of both:
it would have taken you less than a minute to describe the difference between the two. for those who want an answer instead of a condescending response, here is a picture of both:
Last edited by moderneuphoric; 07-15-2010 at 12:56 AM.
07-15-2010, 01:10 AM
#7783
Senior Member
Trader
SL Member
iTrader: (16)
Join Date: Dec 2007
Location: LOWLOW Chicago
Posts: 13,746
THIS IS NOT GROUNDBREAKING NEWS.
WE KNOW.
they looks alike, almost ALL Drag and Rotas and similar quality wheels LOOK like their more expensive counterparts.
they look similar and they cost less, because they are made cheaper.
i wasnt being a dick when i told you to do research, i really meant it.
do research.
the way the wheels are made are completely diff.
Cast vs. Forged
Forging uses intense heat and pressure to transform a [solid} slug of alloy material into the final shape of a wheel. Forged aluminium is about 300 per cent stronger than cast aluminium, yet less material is needed to produce the same "cast alloy wheel", which results in a lighter product. Because of the basic limitations inherent in forging, most forged wheels are two or three piece units. In two-piece construction, a centre is forged and welded or bolted into a spun or stamped outer rim. In a three-piece wheel, the centre is bolted to an inner and an outer rim half. This stands as an advantage of being easily customisable for a variety of widths and offsets.
Casting is a relatively inexpensive way to produce a high-quality, fairly strong alloy wheel. There are two methods used. One, system is known as gravity casting... whereby the molten material is poured into a mold and allowed to cool. These molds are usually made by machining a piece of material on CNC machine equipments to produce a wheel that only requires minor finishing (like drilling or possibly trimming of some excess metal) to be considered complete. The other and better system used is the low pressure or negative pressure casting. Here instead of pouring the molten material into the mould, the molten alloy is drawn up into the mould using a high-pressure vacuum. This eliminates much of the trapped air found in gravity casting process, producing a stronger wheel that is less porous than a gravity-cast one.
WE KNOW.
they looks alike, almost ALL Drag and Rotas and similar quality wheels LOOK like their more expensive counterparts.
they look similar and they cost less, because they are made cheaper.
i wasnt being a dick when i told you to do research, i really meant it.
do research.
the way the wheels are made are completely diff.
Cast vs. Forged
Forging uses intense heat and pressure to transform a [solid} slug of alloy material into the final shape of a wheel. Forged aluminium is about 300 per cent stronger than cast aluminium, yet less material is needed to produce the same "cast alloy wheel", which results in a lighter product. Because of the basic limitations inherent in forging, most forged wheels are two or three piece units. In two-piece construction, a centre is forged and welded or bolted into a spun or stamped outer rim. In a three-piece wheel, the centre is bolted to an inner and an outer rim half. This stands as an advantage of being easily customisable for a variety of widths and offsets.
Casting is a relatively inexpensive way to produce a high-quality, fairly strong alloy wheel. There are two methods used. One, system is known as gravity casting... whereby the molten material is poured into a mold and allowed to cool. These molds are usually made by machining a piece of material on CNC machine equipments to produce a wheel that only requires minor finishing (like drilling or possibly trimming of some excess metal) to be considered complete. The other and better system used is the low pressure or negative pressure casting. Here instead of pouring the molten material into the mould, the molten alloy is drawn up into the mould using a high-pressure vacuum. This eliminates much of the trapped air found in gravity casting process, producing a stronger wheel that is less porous than a gravity-cast one.
good info. Basically, dont buy rotas or drags.
AHHH... very nice and clean!
