woodstock

dude... same here. I just spent 10 minute yanking on them things. did you get yours out yet?

ChiTowntC

nope... said F it and just put them as the headlight accents

woodstock

grr... i want my white license plate lights! can anyone tell me if it's just a difficult twist-and-pull or how I can get these suckers out?

ChiTowntC

someone said just try real hard haha... the way i see it... brighter lights back that make my plates easier to see by cops and witnesses

woodstock

haha... nice one

I finally got them off - it was amazingly easy after twisting at them for so long! Me likey white lights.

finger11

before/after pics?

woodstock

i'll try to get some up later today.

Fsu1dolfan

me too!!!

raWr215

i can't seem to take off the parking lights and the liscense lights, im scared to break it :T

Whocares05050

trial and error.....

raWr215

yawnz, i woked up this morning at 5:55, decided to get my ___ out there, and BAM, got all 4 of them changed, but it's too blue for the license plate :T, too illegal, my brother was like" ur ___ gonna get pulled over in philly"

so back to the drawing board

azuresky

Does anyone have a pic of the green leds in the gauges?

j_roc

It took me a while before I got them out too. Here's what I did though.

1.) Pull out the actual plug from the bulb. There's the wiring, and then there's the housing. Pull out the wiring. It comes out pretty easily.

2.) Get a pair of needlenose pliers and make sure one side is on the outside of the housing and one side on the inside. Like seen below.
[ \] /

3.) Now twist in the appropriate direction. It actually tells you which direction to twist in the manual, but I can't really remember off the top of my head right now. Be carfeul to get a full grip on the housing though, or else you may end up cracking it.

4.) If you twisted in the right direction, the housing should pop out pretty easily.

5.) All you need to do now is pull the OEM bulbs STRAGIHT out. And replace them with the LED cluster.

6.) Now all you need to do is repeat the process in reverse and your done.

bBlover

mmm how did ya do it??

R2D2

Does anybody have nice looking dome light bulbs (non-LEDs) that match the key socket color? and what kind are they?

SpUnKyTC

what are some good blue headlights that are 55w so they wont burn out the harness...deep blue ones what brand do i get?

Hyghgynx

I was bored today and changed out my parking lights to green to match my interior lights. It took about 10 mins. for both. Super easy to do. I already had the bulbs because I was going to use the green for my rear license plate lights. But in CA, you can't have anything but white or amber. I tested the parking lights tonight and it looks niiice IMO. I took pix, so I'll post some in my Profile later. Both the parking lights and rear plate lights are super easy to change. Just refer to p.230-232 in your Owner's Manual.

*Click my "Profile" for the pic.*

tweetie

i want HID... =( too expensive

Fsu1dolfan

BUMP.....New pics and vids on page 1...check it out

Eiso

Too blue for me!