Dan Gardner Custom Sway Bar is now available thru Dezod Motorsports
#224
Assuming it looks like that but yellow and a few decals or badges.
Price is $220 and shipping depends on your location. Probably $20.00 more or less.
Last edited by Domo; 04-05-2010 at 08:14 PM.
#227
I believe the Hotchkis rear sway is 27mm and this Progress sway is 25mm, however. Hotchkis is a hollow bar compared to Progress which is a solid bar. You get lightness with the Hotchkis bar but you get a much more sturdier bar with Progressive. If you read the previous comments, you will find all the info you need.
Assuming it looks like that but yellow and a few decals or badges.
Price is $220 and shipping depends on your location. Probably $20.00 more or less.
Assuming it looks like that but yellow and a few decals or badges.
Price is $220 and shipping depends on your location. Probably $20.00 more or less.
The Progress "off the shelf" bar is a 22mm solid bar
The Dan G edition of the Progress bar is a 25mm solid bar
The Dan G bar, because of it's solid nature and 25mm diameter, it will be MORE stiff and MORE aggressive on all settings more than the Hotchkis AND off the shelf Progress even on their hardest settings. This, in conclusion, will offer a more neutral feel to the car AND can even promote some oversteer on some of the harder settings...
#229
#232
The heims are stronger due to the lack of teflon lining. The endlink assembly uses the same stainless stud. The unit has custom machined spacers to accommodate for all ride heights. So in essence, a small spin off of the current ones that we make and sell specific to this app!
#233
For racing...we typically swap between medium and full-hard (though the bar gets completely disconnected in the rain.) There are zero issues with the links. The whole concept of DG-Spec is to give you guys the same race-proven, bulletproof stuff that we use.
#240