Official STANCE Coilover thread

Reply Subscribe

Thread Tools

Search this Thread

06-13-2012 | 05:30 PM

#141

bryzenga

Junior Member

Joined: Feb 2012

Posts: 18

From: Severna Park, MD

Quote:

Originally Posted by Drey

1. You'll be fine. You can get up to -4* up front and -4.5* rear. If you want more get bolts for the front and hotchkis arms for the rear.
2. This coilovers are the lowest you can get. You'll run into other clearance issues before you get this coilovers maxed out. Depends on your specs, but you should be able to tuck 18s all around.

Awesome -4 was the max I wanted to go anyway, I'll probably run -2 all around or -2 front -3 rear. My specs on my wheels are 18x9.5 +35 all around but I'll probably be getting 2 or 3mm spacers for the rear to be completely flush

07-18-2012 | 02:08 PM

#142

bryzenga

Junior Member

Joined: Feb 2012

Posts: 18

From: Severna Park, MD

how do you adjust the stiffness on these? I have way too much suspension travel and I'm having rubbing issues so i want to get these as stiff as they can go

07-19-2012 | 07:07 AM

#143

dropzone

Senior Member

SL Member

Joined: Jul 2006

Posts: 2,878

From: Central TX

If the damper adjustment for the rear is on top, you'll have to remove the rear hatch interior to do it. Unless you cut up the side panels to access the damper adjustment ****.

07-19-2012 | 02:41 PM

#144

bryzenga

Junior Member

Joined: Feb 2012

Posts: 18

From: Severna Park, MD

Quote:

Originally Posted by dropzone

If the damper adjustment for the rear is on top, you'll have to remove the rear hatch interior to do it. Unless you cut up the side panels to access the damper adjustment ****.

alright, what about the fronts

07-20-2012 | 07:13 AM

#145

dropzone

Senior Member

SL Member

Joined: Jul 2006

Posts: 2,878

From: Central TX

Looking at the pics on the previous page, looks to be the bottom for the fronts. You get the kit new or used? No instructions?

07-22-2012 | 05:31 PM

#146

bryzenga

Junior Member

Joined: Feb 2012

Posts: 18

From: Severna Park, MD

How do I max out the camber in the rear? The front is just the camber plate, right?

07-24-2012 | 11:57 PM

#147

dropzone

Senior Member

SL Member

Joined: Jul 2006

Posts: 2,878

From: Central TX

The front you are able to adjust with the upper camber plate that is on the coilover kit, for the rear has an adjustable camber arm.

08-08-2012 | 07:15 PM

#148

bryzenga

Junior Member

Joined: Feb 2012

Posts: 18

From: Severna Park, MD

okay, thanks all

10-12-2012 | 09:33 AM

#149

sebbyxtc

Senior Member

SL Member

iTrader: (7)

Joined: Mar 2010

Posts: 2,022

From: Bakersfield, CA

how many inches should the front springs be compressed?

12-03-2012 | 06:52 AM

#150

mengsta

Senior Member

SL Member
Scion Evolution

Joined: Feb 2007

Posts: 1,783

From: Milpitas

Just to keep you guys updated. Springs on most coilovers should only be preloaded 2-5mm as per manufacturer recommendations. More preload depending on how you are setting up your vehicle.

12-19-2012 | 12:12 AM

#151

mengsta

Senior Member

SL Member
Scion Evolution

Joined: Feb 2007

Posts: 1,783

From: Milpitas

Just wanted to let you guys know we ordered in a container recently as these Stance coils for the TC1 were on backorder recently. We have one set left in stock that we are letting go at clearance price! We won't be beat on these coilovers, send us a PM for more info.

03-24-2022 | 04:00 AM

#152

1_slow_tc

Junior Member

Joined: Mar 2022

Posts: 1

From: California

years later, I need help

Quote:

Originally Posted by mengsta

hey guys, been a while since this thread has been active nut I figured I'd give it a shot. I have a set of stance super sport gr+ coilovers, and I'm lowered on stock wheels. my rears are maxed out (or so I think), but my rear does not look as low as maxim or some others I've seen. any advice?