dqlostsoulz

iTrader: (3)

What about the endlinks that are provided do you shorten them or make them the same height as the oem front links? Mine at the moment are about half the size of the oem front links.

TxtC27

It depends on how low the front coils are. The lower they are, the shorter the endlinks should be.

dqlostsoulz

iTrader: (3)

I have them as low as they can go with 2 rings removed and the spring pre load at 9 in. I plan on going 7 in to make the front moar low.

TxtC27

Yeah, they should probably just be as short as possible, lol.

TxtC27

I know there's noise with any coilover system, but how much noise are y'all getting up front?

dqlostsoulz

iTrader: (3)

I think i figured it out..my end links are too short and the front sway bar is rubbing on the under body. I am going to extend them tomorrow and see if that solves it.

TxtC27

Is that for noise or what?

dqlostsoulz

iTrader: (3)

Yeah I think thats were the noise is coming from.

TxtC27

I'll mess with it tomorrow too, then. Does it almost sound like something is loose when you go over a bump?

dqlostsoulz

iTrader: (3)

Why you are hearing noises as well? Yeah kinda like a creaking-rubbing-squeaking noise.

TxtC27

Yeah, I just put the coils on a couple of days ago, and it was freaking my friend out, lol. And it's the same noises, it just varies depending on what I'm doing. I get a pop every once in awhile when I'm turning the wheels in place.

dqlostsoulz

iTrader: (3)

did you use the supplied end links as well?

TxtC27

Yeah. I just slammed the fronts and shortened the endlinks to 7cm

Yanki01

I had a knocking sounds when turning the wheel. I tightened the top, middle nut and all the noise went away. Try that first.

TxtC27

You mean the one underneath the damping adjustment ****?

Yanki01

yea

dqlostsoulz

iTrader: (3)

Well i ended up making the endlinks longer from 6 1/2mm to 10 1/2. My problem is solved no more noise and my fronts are now lower as well from doing this.

TxtC27

Nice. I'm raising the fronts back up today because I'm about to head back to school and the roads up in Denton are absolute ____. That and the back coils aren't cooperating.

dqlostsoulz

iTrader: (3)

you have pics of how low it sits right now?

TxtC27

This is how low the front sat before I raised it back up