AZ Desert White tC2 Build..
#41
Looks like they used the factory bump stops. Don't trip off of it they will be fine. They only really come into play when you are bottoming out your suspension. Did you go with the sportlines?
#42
Yep sport lines and nst pulley installed today. I have some creaking sounds. Hope that settles with time?
#43
Nice man. I too have those two upgrades. And if you're referring to the creaking noise when turning the wheel at slow speeds, it may not go away. I installed my sportlines last fall and still have the creaking noise to this day.
#44
First time lowering anything so over worrying I'm sure.
#45
Ohh, that is the sound of two coils of the springs hitting each other when the spring compresses over bumps (primarily at low speeds). These springs are infamous for that. You should have noticed the rear springs had a black isolator in the section where the coils are close together. The front springs don't have this...leading to the noise.
Eibach sent me (for free) isolators to install myself. Piece of cake install and didn't even have to take the wheel off...just jack up the car so you can see the springs and stick it on there. You'll be able to tell where to install them because you'll see the red paint on the springs wearing from the coils hitting each other.
Eibach sent me (for free) isolators to install myself. Piece of cake install and didn't even have to take the wheel off...just jack up the car so you can see the springs and stick it on there. You'll be able to tell where to install them because you'll see the red paint on the springs wearing from the coils hitting each other.
#46
Eibach sent me (for free) isolators to install myself. Piece of cake install and didn't even have to take the wheel off...just jack up the car so you can see the springs and stick it on there. You'll be able to tell where to install them because you'll see the red paint on the springs wearing from the coils hitting each other.
#47
I called them. They had them shipped out the same day.
And yeah, you can clearly see the isolators. I took this photo back when I first got the springs delivered. The rears are the two middle ones. You can see the black rubber tubing that covers the springs on the bottom half.
And yeah, you can clearly see the isolators. I took this photo back when I first got the springs delivered. The rears are the two middle ones. You can see the black rubber tubing that covers the springs on the bottom half.
#48
I called them. They had them shipped out the same day.
And yeah, you can clearly see the isolators. I took this photo back when I first got the springs delivered. The rears are the two middle ones. You can see the black rubber tubing that covers the springs on the bottom half.
And yeah, you can clearly see the isolators. I took this photo back when I first got the springs delivered. The rears are the two middle ones. You can see the black rubber tubing that covers the springs on the bottom half.
Love the much needed low.
#53
Springs in. Attachment 10352
Attachment 10353
And I thought you were supposed to cut the bump stops? Is this not the case on the eibach's? They were in the box after shop was done with install.
Help Plz.
Attachment 10353
And I thought you were supposed to cut the bump stops? Is this not the case on the eibach's? They were in the box after shop was done with install.
Help Plz.
Thread
Thread Starter
Forum
Replies
Last Post
BlingSlade
Scion iA Discussion Lounge
6
10-19-2016 12:39 AM
ScionLife Editor
Scion News Forum
0
09-15-2015 04:40 AM