O.G. Black Mamba Thread...Back At It Again!
#441
Yup that is correct but I really didn't trust it so I opted for the coilover set up. Doing it that way is really cutting it close so I wouldn't go that route. Also the 10kg spring rate on my coilovers is smooth they ride better than the stock setup. I chose to customize my spring rate. If you order them they usually come with 10kg front and 8 kg rear.
#442
i remember my STD suspension contact person telling me this before...
MSRP: $1349
EDIT: wait nevermind, that is for the R1 set (what jtk2 has...Mamba is running on the R3 right? which i believe is more expensive since its the track version)
MSRP: $1349
EDIT: wait nevermind, that is for the R1 set (what jtk2 has...Mamba is running on the R3 right? which i believe is more expensive since its the track version)
#443
jeeezus, anything over $1k is ridic for me but i do wanna be able to adjust the damper :'(
#445
#447
i never checked it it is on their website...
but their exact words to me were:
"I attached you pictures of 4 Scion tC using our Suspension System, the 2 race cars are using our full race ENR 2-Way Suspension System, the 2 others are using our R1 Suspension System."
so in a nutshell...R1 = basic and R3 = ENR 2-way
fwiw, the two tC2s they sent me that had the R1 were greenbeans and the other was the Team Hybrid brown tC2 (someone what a thread on them earlier)
yea, not much help. hopefully Mamba will know more
but their exact words to me were:
"I attached you pictures of 4 Scion tC using our Suspension System, the 2 race cars are using our full race ENR 2-Way Suspension System, the 2 others are using our R1 Suspension System."
so in a nutshell...R1 = basic and R3 = ENR 2-way
fwiw, the two tC2s they sent me that had the R1 were greenbeans and the other was the Team Hybrid brown tC2 (someone what a thread on them earlier)
yea, not much help. hopefully Mamba will know more
#448
Senior Member
SL Member
Thread Starter
iTrader: (1)
Join Date: Jun 2011
Location: Texas
Posts: 1,007
R1 = no front camber adjustment not sure if they have pillow ball mounts. Didn't get much info on these because I wanted the R3's
The STD R3 suspension system has an enhanced forged front pillow-ball top mount to increase steering response. The R3 suspension system also includes an adjustable top mount camber plate for McPherson strut vehicles.
This suspension system is perfect to use on the road, and on the track.
For: Time Attack, Drags,_or Drifting. And could even be used on a_dedicated Race Car.
Compression and rebound: 12-steps of effective, and noticeable_damping adjustment
This is the info I got on the R3's but they are not the enr 2 way those cost about $3,000 and are custom coilovers for circuit racing not regular street driving. The Link is in my sig but the web page is down right now (its being updated)but the contact info is there e-mail them for more info
The STD R3 suspension system has an enhanced forged front pillow-ball top mount to increase steering response. The R3 suspension system also includes an adjustable top mount camber plate for McPherson strut vehicles.
This suspension system is perfect to use on the road, and on the track.
For: Time Attack, Drags,_or Drifting. And could even be used on a_dedicated Race Car.
Compression and rebound: 12-steps of effective, and noticeable_damping adjustment
This is the info I got on the R3's but they are not the enr 2 way those cost about $3,000 and are custom coilovers for circuit racing not regular street driving. The Link is in my sig but the web page is down right now (its being updated)but the contact info is there e-mail them for more info
#449
This is the info I got on the R3's but they are not the enr 2 way those cost about $3,000 and are custom coilovers for circuit racing not regular street driving. The Link is in my sig but the web page is down right now (its being updated)but the contact info is there e-mail them for more info
#450
The only difference in the R1 & R3 is the pillow mounts on the front struts. The struts and springs are exactly the same in every other way. I called them about upgrading my R1 to R3 specs, ~$200 bucks for the pillow mounts. I'll probably do that soon. If you have any questions, I'm bored at work lol
#451
Senior Member
SL Member
Thread Starter
iTrader: (1)
Join Date: Jun 2011
Location: Texas
Posts: 1,007
So since Eibach is taking for ever to release their sway bars for the TC2 I'm going with the TRD Sway Bar Set, Front & Rear p/n PTR07-21100. Should be here on Tuesday...... Can't wait!
Edit: after I install the sway bars and get and alignment its time for the TRD BBK!
Edit: after I install the sway bars and get and alignment its time for the TRD BBK!
Last edited by Backinblacktc2; 02-24-2012 at 10:25 PM.
#456
Senior Member
SL Member
Thread Starter
iTrader: (1)
Join Date: Jun 2011
Location: Texas
Posts: 1,007
lol when I finish playing with my tc2 I might get my wife the xb and me the frs or brz (if they stand up to all the hype). The problem I have is I cant help but modify what ever I buy. damn @ 5 scions!