Shadowking build- standard r3 coilovers for sell!! Hmu
01-28-2012, 06:59 PM
#66
Senior Member
SL Member
Thread Starter
Join Date: Jan 2012
Location: San Antonio, TX
Posts: 195
Hahaha oh you didn't know me and Brian O'conner and Dom are best friends I can't give you the details on what we do but after race wars we'll talk
01-28-2012, 08:25 PM
#70
If your gonna drop it low from your fenders sits at least on top of the tires then you'll need to get probably 225/35 in the front and 235 in the rear just roll and pull a small kind on your fenders but if your planning on going to drop it to my height oh shiz that's a whole different concept lol
01-28-2012, 08:27 PM
#71
Senior Member
SL Member
Team ScioNRG
Join Date: Jan 2009
Location: Wellesley, MA
Posts: 2,406
Same as you (lol, your not as original as you think you are) stretched the stock tires, dropped on S-Techs (needs moar low...) I am planning on either swapping out to wider wheels or going with some spacers. But for now, Im just waiting on the KSports to get released... Those will be bottomed out...
For you, when you get the R3's, roll the fenders and quarter panels, add some SPC front camber bolts, and slam the ____ out of it. LOL you will likely get some rub out of the driverside rear wheel as the camber wont be enough on that side (For whatever reason the driver side doesnt camber in as much as the passenger side does when dropped).
For you, when you get the R3's, roll the fenders and quarter panels, add some SPC front camber bolts, and slam the ____ out of it. LOL you will likely get some rub out of the driverside rear wheel as the camber wont be enough on that side (For whatever reason the driver side doesnt camber in as much as the passenger side does when dropped).
01-28-2012, 08:34 PM
#72
Senior Member
SL Member
Thread Starter
Join Date: Jan 2012
Location: San Antonio, TX
Posts: 195
Same as you (lol, your not as original as you think you are) stretched the stock tires, dropped on S-Techs (needs moar low...) I am planning on either swapping out to wider wheels or going with some spacers. But for now, Im just waiting on the KSports to get released... Those will be bottomed out...
For you, when you get the R3's, roll the fenders and quarter panels, add some SPC front camber bolts, and slam the ____ out of it. LOL you will likely get some rub out of the driverside rear wheel as the camber wont be enough on that side (For whatever reason the driver side doesnt camber in as much as the passenger side does when dropped).
For you, when you get the R3's, roll the fenders and quarter panels, add some SPC front camber bolts, and slam the ____ out of it. LOL you will likely get some rub out of the driverside rear wheel as the camber wont be enough on that side (For whatever reason the driver side doesnt camber in as much as the passenger side does when dropped).
01-28-2012, 08:36 PM
#73
Senior Member
SL Member
Thread Starter
Join Date: Jan 2012
Location: San Antonio, TX
Posts: 195
If your gonna drop it low from your fenders sits at least on top of the tires then you'll need to get probably 225/35 in the front and 235 in the rear just roll and pull a small kind on your fenders but if your planning on going to drop it to my height oh shiz that's a whole different concept lol
01-28-2012, 09:21 PM
#74
Senior Member
SL Member
Team ScioNRG
Join Date: Jan 2009
Location: Wellesley, MA
Posts: 2,406
01-30-2012, 12:20 AM
#78
Senior Member
SL Member
Thread Starter
Join Date: Jan 2012
Location: San Antonio, TX
Posts: 195
I didn't take them off I just taped the area and put paper around for the over spray and just did them. It peels right off so if I had messed up I just did it over.
