Adjustable Rear Upper Control Arm (A-RUCA) for rear camber adjustment
#202
I stopped by earlier today and he was all for it I just need to come up with the dimentions and parts. I was planning on using the inside stock bushings unless the ones you have are worlds better and worth hacking on. As for you I'll send you a beer!
#204
If you have a good shop they will be able to figure it out, or they won't be around to long.
#205
I can't speak for others who Eng parts, but my Eng for my upper rear control arms cost me a hell of a lot more than a beer even with the fact I sleep with her and did the fab work my self.....
If you have a good shop they will be able to figure it out, or they won't be around to long.
If you have a good shop they will be able to figure it out, or they won't be around to long.
#206
Well I guess I'll jack her up and start doing some math (I'm a EE so I know quite a bit of ME junk) I just need to get my measurements. I was hoping I could save some time by getting from the community but I guess not. I'll post mine up for the rest of the community when I'm finished so people can just stop by any shop and get their arms modified.
#210
For those that want to modify the OEM's Please post in my thread below and leave this thread for beautiful fully custom fabricated arms like 2tCornot2tC's
https://www.scionlife.com/forums/sho....php?p=4119437
https://www.scionlife.com/forums/sho....php?p=4119437
#211
hello guys i dont know if their is another thread on this but i did my rear adjustable with the gsp gen 2 honda civic 06-10 only thing is i need a spacer to fit in that giant whole i couldnt find it and now my car is making creaking noises when i move slow or get out of my car. also most of the pics are not mine so im not taking full credit for this but i had help from other guys i just need to see what will fit in that huge whole
#215
I've been asking Godspeed for a while now and it seems like they're just waiting on their finished product. I'm not sure if I'm allowed to post this, but they sent me a picture of what their product is going to look like. Every time I ask about the ETA, they always respond with "hopefully next month or so" and that's been going on since dec. '12. Maybe if a lot of other people contact them regarding the RUCA's, they'll hurry the heck up
#216
There has been a few who have direct copies and modified copies here and some good and some questionable.
There was a thread started in the summer time by someone to gauge interest on getting them made and his last post was he would be out of town for work, look it up maybe he's got production running it was 2 months ago ?
I have a set and they cost around $500 in parts and I did the labour . You can see in the photo we changed both ends to spherical bearings, the inner rubber one was doing nothing due to the factory miss aliment between the 2 mounting points.
Last edited by noisy1; 09-16-2013 at 10:41 AM.
#218
If your referring to the one in the photo I posted?
They were ones I made for our car over a 2 month time of no lunchs or breaks at work and I am not sure right now if I want to use that as a weight loss program!!
I had $500 in parts alone invested to make them due to the price of good parts in Canada.
If you found a good aliment shop they can shim the rear bearing to get the rear camber into a good street aliment. It would cost you almost the $500 for the aliment and work.
#219
I've been asking Godspeed for a while now and it seems like they're just waiting on their finished product. I'm not sure if I'm allowed to post this, but they sent me a picture of what their product is going to look like. Every time I ask about the ETA, they always respond with "hopefully next month or so" and that's been going on since dec. '12. Maybe if a lot of other people contact them regarding the RUCA's, they'll hurry the heck up
#220
Hey Odlivionlord,
If your referring to the one in the photo I posted?
They were ones I made for our car over a 2 month time of no lunchs or breaks at work and I am not sure right now if I want to use that as a weight loss program!!
I had $500 in parts alone invested to make them due to the price of good parts in Canada.
If you found a good aliment shop they can shim the rear bearing to get the rear camber into a good street aliment. It would cost you almost the $500 for the aliment and work.
If your referring to the one in the photo I posted?
They were ones I made for our car over a 2 month time of no lunchs or breaks at work and I am not sure right now if I want to use that as a weight loss program!!
I had $500 in parts alone invested to make them due to the price of good parts in Canada.
If you found a good aliment shop they can shim the rear bearing to get the rear camber into a good street aliment. It would cost you almost the $500 for the aliment and work.
Id much rather have an adjustable metal piece like your solution which isn't a modification to the actual OEM arm itself.