Notices
Scion xA/xB 1st-Gen Drivetrain & Power Engine and transmission discussions...

need more manipulation here

Thread Tools
 
Search this Thread
 
Old 03-09-2005, 12:29 AM
  #1  
jct
Senior Member
10 Year Member
5 Year Member
SL Member
Thread Starter
 
jct's Avatar
 
Join Date: Jul 2004
Posts: 13,961
Default need more manipulation here

soooooooo yeah yeah yeah i know i know, but i'm too lazy anyways

and i'm not in the mood to use the search featcher either

you nice ppl are manipulating me on buy and intake system you guys are EVIL DO'ers damn it

so which is better

cheaper

and where i can buy 'em (website)

that does throw a C.E.L. !!!

i don't want no debate either cause i can find that ever other intake posts i see

from what you's ppl are sayin about the nice CAI and the nice word of hydro lock
so i'm going to stay away from CAI's!!! all together

and why is it that all that nice power kicks in around 3K rpm's anyways???
jct is offline  
Old 03-09-2005, 12:36 AM
  #2  
Senior Member
10 Year Member
5 Year Member
SL Member
 
xmetalx's Avatar
 
Join Date: Feb 2005
Posts: 471
Default

what we are sayin is good with the injen short ram, its 150 from ptuning.com and its the only intake that will make you hit 100lbs of torque at the wheels and gives the most HP gains. you wont have to be all worried when it rains either
xmetalx is offline  
Old 03-09-2005, 01:18 AM
  #3  
jct
Senior Member
10 Year Member
5 Year Member
SL Member
Thread Starter
 
jct's Avatar
 
Join Date: Jul 2004
Posts: 13,961
Default

oooops forgot too add its for a "xA"
jct is offline  
Old 03-09-2005, 02:55 AM
  #4  
Senior Member
10 Year Member
5 Year Member
SL Member
 
unlmtdndeavor's Avatar
 
Join Date: Jan 2004
Location: San Ramon, CA
Posts: 645
Default

get an injen like the guy said
unlmtdndeavor is offline  
Old 03-09-2005, 02:59 AM
  #5  
Senior Member
10 Year Member
5 Year Member
SL Member
 
M-Flo's Avatar
 
Join Date: Feb 2005
Location: Alameda, CA
Posts: 638
Default

Our engines benefit more from short ram intakes.

The K&N Typhoon intake or the Injen SR inake would be your best bet. Swapping out the filter for the Apexi power filter would be a good idea too, but that's another story altogether.
M-Flo is offline  
Old 03-09-2005, 03:47 AM
  #6  
Senior Member
10 Year Member
5 Year Member

SL Member
Team N.V.S.
 
hotbox05's Avatar
 
Join Date: Sep 2004
Location: Sacramento, CA / Nor*Cal
Posts: 13,706
Default

Injen.
hotbox05 is offline  
Old 03-09-2005, 04:39 AM
  #7  
Senior Member
10 Year Member
5 Year Member
DeepSouth Scions
SL Member
 
pdrizzle's Avatar
 
Join Date: Oct 2004
Location: New Orleans, LA
Posts: 463
Default

I don't even know why you guys are answering this dude... this topic has been posted way too much. I did a search for 'best + intake + xa' and came up with 12 results, 9 of which were actually different (it listed a couple of posts twice). I say if this guy is too lazy to do a simple search, everyone should be 'too lazy' to reply to his lame and repetitive post.
pdrizzle is offline  
Old 03-09-2005, 11:04 AM
  #8  
jct
Senior Member
10 Year Member
5 Year Member
SL Member
Thread Starter
 
jct's Avatar
 
Join Date: Jul 2004
Posts: 13,961
Default

Originally Posted by pdrizzle
I don't even know why you guys are answering this dude... this topic has been posted way too much. I did a search for 'best + intake + xa' and came up with 12 results, 9 of which were actually different (it listed a couple of posts twice). I say if this guy is too lazy to do a simple search, everyone should be 'too lazy' to reply to his lame and repetitive post.
hey man there just very helpful ppl on these boards, and i'm very greatful for that too

thanks for the replys guys
jct is offline  
Old 03-09-2005, 01:13 PM
  #9  
Senior Member
10 Year Member
5 Year Member
Scikotics
SL Member
 
FrankenScion's Avatar
 
Join Date: Jan 2005
Location: www.scikotics.com
Posts: 7,374
Default

I keep hearing this "hydro-locked" bs. Has anyone actually hydr-locked a scion from using a CAI? I ordered mine with the AEM and now I am converting to the Typhoon and I have driven through hella rain and some deep ___ puddles and never had a problem in almost 9000 miles.
FrankenScion is offline  
Old 03-09-2005, 01:55 PM
  #10  
Member
10 Year Member
5 Year Member
SL Member
 
jocdoc's Avatar
 
Join Date: Feb 2004
Location: Daphne, Alabama
Posts: 80
Default

meez, grabbin my crotch, home dog.
jocdoc is offline  
Old 03-09-2005, 02:23 PM
  #11  
Senior Member
10 Year Member
5 Year Member
DeepSouth Scions
SL Member
 
pdrizzle's Avatar
 
Join Date: Oct 2004
Location: New Orleans, LA
Posts: 463
Default

Hydro locking only occurs if your filter is low enough to dip into a huge puddle, and if that is the case, water would probably be coming in the passenger compartment, which means that you have a lot more problems than sucking water into your motor (the electricals becoming wet and fried, transmission getting water in it, etc). The AEM cai has a bypass valve that allows air to flow in the event that your primary filter is sucking up water. If you don't have this, you're at risk. But, like I said, If your car becomes submerged in enough water to reach your cai filter, you're looking at a lot of damage to the interior anyway, so just make sure you have good coverage.

I drove in some very deep water in a lowered truck a few years ago and the water started coming in the passenger compartment (it was up to my seat) and shortly after my engine died. The motor was not ruined, the computer must have shut down the engine. I couldn't start it until it dried out a few hours later. The engine was fine, the computer was fine, I got the tranny checked and it was fine, but I had a good scare. I didn't have a cai, so the water reached my stock air filter. I claimed it on my insurance and they had my interior cleaned.
pdrizzle is offline  
Old 03-09-2005, 03:09 PM
  #12  
Senior Member
10 Year Member
5 Year Member

SL Member
Team ScioNRG
 
dgHotLava's Avatar
 
Join Date: Feb 2004
Location: Fortress of ScioNRG
Posts: 5,274
Default

Originally Posted by FrankenScion
I keep hearing this "hydro-locked" bs. Has anyone actually hydr-locked a scion from using a CAI? I ordered mine with the AEM and now I am converting to the Typhoon and I have driven through hella rain and some deep ___ puddles and never had a problem in almost 9000 miles.
i too had ( notice i said HAD) the K&N typhoon. I drove it in a heavy rain storm once. the filter became clogged with water (even with the blue waterproof sock on it ) and the motor was strugling to get air. it really bogged down the motor...now this is not hydro locking but it is a draw back...
even if i am 1 in the 1000's, it still happened with the typhoon...so i don't recomend it...

(and i did hydro-lock a car once, twisted three connecting rods and snapped the crank...not a scion but i did it...)
dgHotLava is offline  
Old 03-09-2005, 10:35 PM
  #13  
jct
Senior Member
10 Year Member
5 Year Member
SL Member
Thread Starter
 
jct's Avatar
 
Join Date: Jul 2004
Posts: 13,961
Default

off topic in my own post :D

have you ever had plastic rapped on your driveshaft and rear axle so bad that you couldn't drive it any more

yeah i done that one once i was spinning the tires to get grip on a large sheet of plastic BAD mistake

luckly it was a work truck and had to help cut the truck lose too...
jct is offline  
Old 03-09-2005, 10:39 PM
  #14  
Senior Member
10 Year Member
5 Year Member

SL Member
Team ScioNRG
 
dgHotLava's Avatar
 
Join Date: Feb 2004
Location: Fortress of ScioNRG
Posts: 5,274
Default

got all mixed up with one of those blue tarps...does that count?
dgHotLava is offline  
Old 03-09-2005, 10:48 PM
  #15  
jct
Senior Member
10 Year Member
5 Year Member
SL Member
Thread Starter
 
jct's Avatar
 
Join Date: Jul 2004
Posts: 13,961
Default

hey anything that sofa king slipery sure it does
jct is offline  
Old 03-09-2005, 11:09 PM
  #16  
Senior Member
10 Year Member
5 Year Member

SL Member
Scion Evolution
 
TheScionicMan's Avatar
 
Join Date: Jan 2004
Location: In the Hot Tub
Posts: 5,736
Default

I've seen a couple of Wranglers that hydro-locked. Broke a connecting rod, the broken rod spun around and tore a gash thru the oil pan... Engine - DONE.

Of course both had been trying to cross a creek or a river and had pushed until water was coming up onto the hood. Can you say bye warranty, hello long block...

In a nutshell, you need to draw enough water at one time to fill the cylinder at TDC
TheScionicMan is offline  
Old 03-09-2005, 11:19 PM
  #17  
jct
Senior Member
10 Year Member
5 Year Member
SL Member
Thread Starter
 
jct's Avatar
 
Join Date: Jul 2004
Posts: 13,961
Default

yeah its a 150 for the xB short ram intake and a $211 for the xA S.R.I. WTF!!!
jct is offline  
Old 03-09-2005, 11:30 PM
  #18  
Senior Member
10 Year Member
5 Year Member

SL Member
Scion Evolution
 
TheScionicMan's Avatar
 
Join Date: Jan 2004
Location: In the Hot Tub
Posts: 5,736
Default

Supply and demand...
TheScionicMan is offline  
Old 03-09-2005, 11:48 PM
  #19  
jct
Senior Member
10 Year Member
5 Year Member
SL Member
Thread Starter
 
jct's Avatar
 
Join Date: Jul 2004
Posts: 13,961
Default

well i thats the price you pay for power and you do get what you pay for in the long run!!! next pay check here i come injen S.R.I!!! i can't wait lol
jct is offline  
Old 03-09-2005, 11:55 PM
  #20  
Senior Member
5 Year Member
SL Member
 
DTurnbull's Avatar
 
Join Date: Feb 2005
Location: Galt, CA
Posts: 226
Default Re: need more manipulation here

Speak english please!

Originally Posted by hornet_on_flower
soooooooo yeah yeah yeah i know i know, but i'm too lazy anyways

and i'm not in the mood to use the search featcher either

you nice ppl are manipulating me on buy and intake system you guys are EVIL DO'ers damn it

so which is better

cheaper

and where i can buy 'em (website)

that does throw a C.E.L. !!!

i don't want no debate either cause i can find that ever other intake posts i see

from what you's ppl are sayin about the nice CAI and the nice word of hydro lock
so i'm going to stay away from CAI's!!! all together

and why is it that all that nice power kicks in around 3K rpm's anyways???
DTurnbull is offline  


Quick Reply: need more manipulation here



All times are GMT. The time now is 11:33 AM.