side exit exhaust done (pix included)
#1
side exit exhaust done (pix included)
well people, i finally got my exhaust done.. exits just before the rear wheel on the passenger side with one small chrome tip (2.5") .. pix soon..
currently the car is unmuffled.. i intended to use this pipe strictly for autocross, but it's STILL too loud so i'm due back at the shop for some glasspack installation..
i hate posting without pix, but i'm too excited not to :D
mikochu: Updated with pictures!
currently the car is unmuffled.. i intended to use this pipe strictly for autocross, but it's STILL too loud so i'm due back at the shop for some glasspack installation..
i hate posting without pix, but i'm too excited not to :D
mikochu: Updated with pictures!
#10
So, you got a new pipe made from the header to passenger side? What size piping? Does it have a cat? If you want me to host the images..and maybe a sound file, just email them to me. :D
#14
Originally Posted by Boxer Rebellion
Good luck racing it in Modified
Originally Posted by SCCA 05 Rulebook FSP guidelines
15.10 ENGINE AND DRIVE TRAIN
H. Exhaust manifolds and muffler systems are free, except that they
must be quiet and terminate behind the driver. Exhaust heat
shields may be removed.
H. Exhaust manifolds and muffler systems are free, except that they
must be quiet and terminate behind the driver. Exhaust heat
shields may be removed.
i don't understand how this puts me in modified?
#15
Originally Posted by mikochu
So, you got a new pipe made from the header to passenger side? What size piping? Does it have a cat? If you want me to host the images..and maybe a sound file, just email them to me. :D
#19
Originally Posted by uncompiled
It shouldn't, if it's a proper exhaust. Unless he starts doing engine mods, I'd think he'd be in street touring or something. What class are you currently racing in?
#20
Originally Posted by mikochu
Hey Tamago,
If you can, take pics of the piping. I'm curious how the piping was done. Also, is it a straight pipe? Or was the stock piping compromised?
If you can, take pics of the piping. I'm curious how the piping was done. Also, is it a straight pipe? Or was the stock piping compromised?
the pipe is flanged right behind the cat, and i had a flange welded onto my stock center section, so i can bolt/unbolt and replace exhaust in less than 10 mins.. it's sweet, the muffler guy was all excited about it lol i guess it was his first exhaust like this..
piping comes straight back, turns where the stock piping turns, then instead of turning and going over the axle to the muffler, it just angles slightly and comes straight out in front of the rear wheel..
so basically like an L .. 2" piping...
btw, to those of you thinking backpressure isn't important... i'm here to tell you right now, you WANT some backpressure.. i hope the glasspack helps wit this cuz right now i'm not so hot in the low end torque.. not that that matters, in autoX (where i'll be using this, i will not street the car with this setup) i'll be up in the RPM's anyway..