Fastest 1NZ-FE Scion xA (Video)
07-12-2011 | 04:28 AM
#42
Senior Member
Fail, INC
Club One
SL Member
Joined: Nov 2004
Posts: 14,929
From: What's in your Box...
Ok, here's what were gonna due. Were gonna put the skepticism to rest.
Justin the car is coming to you guys at Ptuning. I'll finish putting in the new motor and turbo and LSD and then it's going on my trailer to you guys. Andrew seemed cool with it so let's do it. You get to put all my new parts to the test. I'll bring the platinum1000 and the new Haltech CDI system. You get the best of everything.
I'll drop it off and you guys get all the time you need to make 500hp. Or something damn close.
You can even run it down the track, shoot video what ever you want to do. I got lots of time to play. So let's see what we can do together.
Justin the car is coming to you guys at Ptuning. I'll finish putting in the new motor and turbo and LSD and then it's going on my trailer to you guys. Andrew seemed cool with it so let's do it. You get to put all my new parts to the test. I'll bring the platinum1000 and the new Haltech CDI system. You get the best of everything.
I'll drop it off and you guys get all the time you need to make 500hp. Or something damn close.
You can even run it down the track, shoot video what ever you want to do. I got lots of time to play. So let's see what we can do together.
07-12-2011 | 11:18 AM
#43
Senior Member
Scikotics
SL Member
Joined: Dec 2006
Posts: 2,476
From: Patuxent River, MD
Indeed, when you have a track day please let me know, I'll be sure to be there. I think the Scion Show of Champions will be on Oct. 16 at Capitol Raceway this year, that would make a great debut event.
07-12-2011 | 06:41 PM
#44
Senior Member
SL Member
Joined: Jul 2005
Posts: 1,902
From: PTuning
.Oh and Ill get some video up soon.
07-13-2011 | 09:22 AM
#45
Banned
SL Member
Joined: Jul 2008
Posts: 230
From: Florida
New 77.5mm head gaskets from Golden Eagle are done and on the way for the bored out block. Also got a 4 bar map sensor from Haltech. Should be good to 40 PSI. Now just waiting on the new rods from Crower to get back from heat treat, then we can assemble.
07-16-2011 | 05:06 PM
#48
Senior Member
SL Member
Joined: Jan 2010
Posts: 103
From: Ohio
07-17-2011 | 03:09 AM
#49
Senior Member
SL Member
Joined: Jul 2005
Posts: 1,902
From: PTuning
Fairly certain it will be in Ohio this year ... late summer early fall. Last year it was in Indiana. Follow this website for updates... http://www.goexposed.com/
07-26-2011 | 11:32 PM
#53
Thread Starter
Member
Joined: Apr 2005
Posts: 42
From: Richmon, VA
on the matter of xbgod. im glad that you said you were going for the highest horsepower xb. that settles my beef with you for the most part. because that means you arent about racing. even tho you said you had a full race setup. most of those parts will never come into play because you just admitted that your car is a dyno *****.
07-26-2011 | 11:39 PM
#54
Banned
SL Member
Joined: Jul 2008
Posts: 230
From: Florida
I am a dyno-*****!
Mainly because I need to test parts to make sure what we make at TBR works and stays together. I enjoy manufacturing parts.
This time with this new build, since Ptuning will be wiring and tuning it. We will take it to the local track there with the guys and see what it will do after we dyno it there. And of course shoot some vids.
But after that, I'll be back to manufacturing parts and coming up with new ideas and better parts for the industry.
I just don't have time to race. I like making money and making parts.
Mainly because I need to test parts to make sure what we make at TBR works and stays together. I enjoy manufacturing parts.
This time with this new build, since Ptuning will be wiring and tuning it. We will take it to the local track there with the guys and see what it will do after we dyno it there. And of course shoot some vids.
But after that, I'll be back to manufacturing parts and coming up with new ideas and better parts for the industry.
I just don't have time to race. I like making money and making parts.
Thread
Thread Starter
Forum
Replies
Last Post
saifulreza108
Scion xA/xB 1st-Gen Drivetrain & Power
4
07-01-2005 09:19 AM
