Hooking up a PS2 to my AVX-2404. Need some help.
11-01-2005, 01:36 AM
#1
Member
Thread Starter
Join Date: Sep 2005
Posts: 37
Hooking up a PS2 to my AVX-2404. Need some help.
I tried to hook up my PS2 tonight. When I took apart my consel I couldnt find a video in. There was a yellow wired labeled NAVI. So I just hooked it up to that. There was a couple sets of red and white wires. One label rear and one labeled front and that was all. I know this is kinda vague but someone maybe able to help. I can get the PS2 to show on the screen when I hit my ex-in button but no sound. Any help would be great.
11-01-2005, 01:59 PM
#2
Senior Member
SL Member
Join Date: Feb 2005
Location: St. Louis, MO
Posts: 2,087
Usually, yellow is a composit video (could be input or output..)
White and red are your audio lines....again it could be an input or output.
It sounds like these are all input lines.,..you should be fine
White and red are your audio lines....again it could be an input or output.
It sounds like these are all input lines.,..you should be fine
11-01-2005, 03:08 PM
#3
Senior Member
SL Member
Join Date: Dec 2004
Location: Benton, IL
Posts: 3,435
^^^ I agree with the Dad....however, if the two sets of red and white RCA's say front and rear, those are probably outputs.....doesn't seem like it would have front and rear inputs (unless it's some dual zone thing)..... you'll probably need to look for an Aux input that's red and white....that's my guess
11-01-2005, 03:34 PM
#4
Senior Member
SL Member
Join Date: Feb 2005
Location: St. Louis, MO
Posts: 2,087
Originally Posted by SCI_TC_GUY
^^^ I agree with the Dad....however, if the two sets of red and white RCA's say front and rear, those are probably outputs.....doesn't seem like it would have front and rear inputs (unless it's some dual zone thing)..... you'll probably need to look for an Aux input that's red and white....that's my guess
Thread
Thread Starter
Forum
Replies
Last Post
Sgtfluffy16
Regional - Northeast
3
07-28-2021 10:32 PM
