Scion xB Wiring Colors
#1
Scion xB Wiring Colors
CREDITS: This article was written by a dedicated Scion Life member. Please let out Inazuma know if this article was helpful to you!
DISCLAIMER: Scionlife.com does not take any responsibility in what you do to your car. This FAQ could be filled with incorrect information. You could be voiding your warranty if not installed by a certified mechanic or dealership. It is quite possible that you can totally mess up your car by using this as a guide to install anything. This can result in serious bodily injury, death, dismemberment, sexually transmitted diseases and so forth to you and anybody else in case of an accident resulting from failure to take safety precautions and/or following the instructions in this write-up.
Preface:
I know a lot of you will want this precious info Its from a good source. I will be installing an alarm in the next few weeks and will be taking questions from anyone who needs help. Anyways, enjoy!
-- Inazuma
Scion XB Wiring Colors
NOTES:
*1 Meter these wires while turning the key in the driver door key cylinder. Unlock requires a double pulse. Can also use the passenger door key cylinder wire for unlock, which only requires a single pulse. It is blue/red (-) in the passenger kick in a 14 pin plug.
*2 Also found at the top of the fuse box in a 13 pin plug.
*3 The data link connector is below the fuse box. The tach wire is in pin 9.
*Administrator's Note: this Post is over 15 years old and the Original Diagram has long expired and no longer available.
______
DISCLAIMER: Scionlife.com does not take any responsibility in what you do to your car. This FAQ could be filled with incorrect information. You could be voiding your warranty if not installed by a certified mechanic or dealership. It is quite possible that you can totally mess up your car by using this as a guide to install anything. This can result in serious bodily injury, death, dismemberment, sexually transmitted diseases and so forth to you and anybody else in case of an accident resulting from failure to take safety precautions and/or following the instructions in this write-up.
Preface:
I know a lot of you will want this precious info Its from a good source. I will be installing an alarm in the next few weeks and will be taking questions from anyone who needs help. Anyways, enjoy!
-- Inazuma
Scion XB Wiring Colors
NOTES:
*1 Meter these wires while turning the key in the driver door key cylinder. Unlock requires a double pulse. Can also use the passenger door key cylinder wire for unlock, which only requires a single pulse. It is blue/red (-) in the passenger kick in a 14 pin plug.
*2 Also found at the top of the fuse box in a 13 pin plug.
*3 The data link connector is below the fuse box. The tach wire is in pin 9.
*Administrator's Note: this Post is over 15 years old and the Original Diagram has long expired and no longer available.
______
Last edited by MR_LUV; 05-15-2020 at 12:57 PM. Reason: Added Administrator's Note
#2
Alarm
Are the wiring colors the same in the tC? I am trying to install a power window roll/up module for my alarm and can't figure out what color the power window wires are.
Last edited by MR_LUV; 05-15-2020 at 12:45 PM. Reason: Awarded 15 Yr Badge
#5
I have a question in regards to installing an aftermarket Tachometer.
I will be purchasing a C2 Auto Meter Tach w/ shift light.
I do know that our cars are distributorless, and run of DIY or something, and that if you wanted to install a tachometer(aftermarket) you'd have to purchase a module to convert stuff..
Well, my concern is, I already bought the Tach., and I'm stuck...lol
I knew I was going to run into this problem, but they're ARE ways around this..
I believe that MSD makes a module to plug a big-face tach into, that then plugs into your ECU or this *3 port..
Please.. HELP!!! :twisted:
Thanks!
-Tylor
I will be purchasing a C2 Auto Meter Tach w/ shift light.
I do know that our cars are distributorless, and run of DIY or something, and that if you wanted to install a tachometer(aftermarket) you'd have to purchase a module to convert stuff..
Well, my concern is, I already bought the Tach., and I'm stuck...lol
I knew I was going to run into this problem, but they're ARE ways around this..
I believe that MSD makes a module to plug a big-face tach into, that then plugs into your ECU or this *3 port..
Please.. HELP!!! :twisted:
Thanks!
-Tylor
#6
I installed an autometer sport comp in my box with no problems I just hooked the tach lead into the data link connector # 3 { black wire } the only thing that had to be done to the tach was the yellow and brown wire loops in the tach had to be cut as per the autometer instructions so it would work for our 4 cyl setup.
#13
wow great info Inazuma - definitely a keeper
would you happen to know how i would hook up the halos and leds lights from a projector headlight to the existing turn signal wires? i'm not that techy but i'm sure i would have to splice them onto the existing turn/parking signal wires. any info/instrux on that would be appreciated. thanks.
would you happen to know how i would hook up the halos and leds lights from a projector headlight to the existing turn signal wires? i'm not that techy but i'm sure i would have to splice them onto the existing turn/parking signal wires. any info/instrux on that would be appreciated. thanks.
#18
Originally Posted by zinker
if anyone looks by tomorrow or today I guess I got a line out converter for the stock HU so I can run my subs which wire is the remote the radio 12v blue/yellow or radio switch gray
Also even though this thread is old, I thought anyone who reads it should be thanking DEI directechs bc that is where Inazuma copied it from. I work in an install bay and we get our wire info from the exact same place and they look exactly like that.
#19
Radio Mute Button
Has anyone re-wired their steering controls to include a mute button? I would like to have my mode button become my mute control. I know there must be a pin on the back of the radio that will provide a remote mute - anyone explored this?
#20
My first post here.
For those who are looking for tC.
Here you are.
This is a link from Bulldog Alarm System Wiring Diagram.
http://www.directwholesale.net/diagr...8403&MakeID=51
___
For those who are looking for tC.
Here you are.
This is a link from Bulldog Alarm System Wiring Diagram.
http://www.directwholesale.net/diagr...8403&MakeID=51
___
Last edited by MR_LUV; 04-18-2020 at 10:55 PM. Reason: Awarded 10 Yr Badge