hotbox05

the 15x8 with 0 offset is WAY TOO much

dasaint80

here you go. 185/60/15 on S-Tech I rub in the rear, I haven't rolled my fenders yet.
Should I do camber first, them roll them or do both?

salteen

^woah! it's my twin!

dasaint80

yeah, I need to roll my fenders!! I'm getting cambers too, soon.

D_Unit

I hate to revive an old thread, but I really like the old school look of your boxy XBs. I just got an 08 xb, and was wondering if you guys think a black gen2 can pull off this look? I was thinking gold 002s with either 16x7 3.5" lip or 17x7 with 1.5" lip? Unfortunately, they don't make a 3.5" lip for the 17s or 18s...

Skuff_Box

Do it and post a pic. Even though second gen's are the bastard mutant older brothers I would still like to see what it would look like.

emokid158

gtixb

I couldn't seem to find the answer in here, so will the 002's, in a 16x7 fit an XB with no issues if I kept the stock ride height?

813_toaster

u could slam it and still be good

EAmon

yay
reviving a thread!
XD
ok
so i just got a set of 002s in 15x8
im running stock suspension
but plan on dropping
so with stock suspension i should be fine running these
or would i need to run camber?
also
im thinking about running my 195/60s on these
how stretched would they be?

-EAmon

burstaneurysm

You'd be fine @ stock height, you might need to roll your fenders depending on how low you want to go.

Roll the fenders before cambering, IMO.

JDMxbB

how would 16x8's with 0 offset work?

205/45/16 will that rub like mad?

would that be fine with passengers in the car???

so pretty much in order to get these wheels by this size.

rolling is a requirement correct???

how about pulling?

where can we get these fender flares that dont look to wild.

thanx.

JDMxbB

does anybody have a pic of a 16x8 0 offset.

to see how much it's sticking out?

burstaneurysm

Dude, this page alone has 4 pics of the 0 offset.
Look at the other pages.

RedMatrixXRS

this may stupid, but i'm about to buy a set (15x8 0 offset). I have Goldlines on now. The rims I'm buying are 195/50/15.

Will I rub bad? Should I put on the OEM springs until I get the fenders rolled?

emokid158

if i were you i'd roll the fenders. good tire size, but the fenders should be rolled.

enjoi

Where is the cheapest place to get xxr sportmax 002 rims?

g35drift

ebay

Gothbox

forgot I never posted these up in this thread,
16x8s zero offset, 195/45 tires
flat black lips,replaced "rivets" with 1/2in spikes.
fender lips have been cut out and fenders have been beat on as well.



-8 camber




And my old 15x8s, 195/45 tires on an 05 xA now,
Tenzo springs in front and air shocks in back with no springs. rear fender lips have been rolled and a little beat on.

Sciond

lol you beat the tar out of those wheel wells......nice fitment though